In this work, we present a low-power 2nd order band-pass filter for neural recording applications. The central frequency of the passband is set to 375Hz and the quality factor to 5 to properly process the neural signals related to the onset of epileptic seizure, and to strongly attenuate all the out of band biological signals and electrical disturbances. The biquad filter is based on a fully differential Tow Thomas architecture in which high-valued resistors are implemented through switched high-resistivity polysilicon resistors. A supply voltage as low as 0.8V and MOS transistors operating in the sub-threshold region are exploited to achieve a power consumption as low as 170nW, when driving a 1pF load capacitance. The filter exhibits a tuning range of the resonance frequency from 200Hz to 400Hz, and an area footprint of only 0.021 mm2. Very low power consumption and area occupation are key specifications for integrated, multiple-sensors, neural recording systems.
Low power switched-resistor band-pass filter for neural recording channels in 130nm CMOS / Centurelli, F.; Fava, A.; Monsurro, P.; Scotti, G.; Tommasino, P.; Trifiletti, A.. - In: HELIYON. - ISSN 2405-8440. - 6:8(2020), pp. 1-6. [10.1016/j.heliyon.2020.e04723]
Low power switched-resistor band-pass filter for neural recording channels in 130nm CMOS
Centurelli F.;Fava A.;Monsurro P.
;Scotti G.;Tommasino P.;Trifiletti A.
2020
Abstract
In this work, we present a low-power 2nd order band-pass filter for neural recording applications. The central frequency of the passband is set to 375Hz and the quality factor to 5 to properly process the neural signals related to the onset of epileptic seizure, and to strongly attenuate all the out of band biological signals and electrical disturbances. The biquad filter is based on a fully differential Tow Thomas architecture in which high-valued resistors are implemented through switched high-resistivity polysilicon resistors. A supply voltage as low as 0.8V and MOS transistors operating in the sub-threshold region are exploited to achieve a power consumption as low as 170nW, when driving a 1pF load capacitance. The filter exhibits a tuning range of the resonance frequency from 200Hz to 400Hz, and an area footprint of only 0.021 mm2. Very low power consumption and area occupation are key specifications for integrated, multiple-sensors, neural recording systems.File | Dimensione | Formato | |
---|---|---|---|
Centurelli_Low-power_2020.pdf
accesso aperto
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Creative commons
Dimensione
1.39 MB
Formato
Adobe PDF
|
1.39 MB | Adobe PDF |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.