Comparing frequency-dependent and distributed parameter with lumped losses power cable line models for cable insulation coordination against overvoltages

Simulations of transients are an obliged step for the insulation coordination of cable lines. Although a frequencydependent power cable line model better takes into account real conditions since resistive and inductive parameters vary with frequency, a distributed parameter with lumped losses power cable models can be useful to simplify and give higher flexibility to the insulation coordination study. In such a case, a dilemma rises up when a frequency shall be selected for the determination of the cable parameters. In this study, a comparative analysis between the two models has been performed considering a typical configuration layout, i.e. an overvoltage coming from an overhead line and stressing the cable line terminated on a transformer. The overvoltages stressing both cable insulation wall and cable thermoplastic jacket are evaluated using the same system configuration with both frequency-dependent and distributed parameter with lumped losses power cable line models, in the latter case sweeping different frequency values for the determination of the cable parameters. A frequency range that minimise the differences between the overvoltage estimation using the two models is suggested.