An innovative and comprehensive experiment (named "Multimat") was successfully carried out at CERN HiRadMat facility on 18 different materials relevant for Collimators and Beam Intercepting Devices. Material samples, tested under high intensity proton pulses of 440 GeV/c, exceeding the energy density expected in HL-LHC, ranged from very light carbon foams to tungsten heavy alloys, including novel composites as graphite/carbides and metal/diamond without and with thin-film coatings. Experimental data were acquired relying on extensive integrated instrumentation (strain gauges, temperature sensors, radiation-hard camera) and on laser Doppler vibrometer. This allows investigating relatively unexplored and fundamental phenomena as dynamic strength, internal energy dispersion, nonlinearities due to inelasticity and inhomogeneity, strength and delamination of coatings and surfaces. By benchmarking sophisticated numerical simulations against these results, it is possible to establish or update material constitutive models, which are of paramount importance for the design of devices exposed to interaction with particle beams in high-energy accelerators such as the HL-LHC or FCC-hh.
Dynamic testing and characterization of advanced materials in a new experiment at CERN HiRadMat facility / Bertarelli, A.; Accettura, C.; Berthome, E.; Bianchi, L.; Bolz, P.; Carra, F.; Fichera, C.; Frankl, M. I.; Furness, T.; Gobbi, G.; Grosclaude, P.; Guardia-Valenzuela, J.; Guinchard, M.; Lechner, A.; Mollicone, P.; Pasquali, M.; Portelli, M.; Redaelli, S.; Rigutto, E.; Sacristan De Frutos, O.; Simon, P.. - In: JOURNAL OF PHYSICS. CONFERENCE SERIES. - ISSN 1742-6588. - 1067:8(2018). (Intervento presentato al convegno 9th International Particle Accelerator Conference, IPAC 2018 tenutosi a Vancouver; Canada) [10.1088/1742-6596/1067/8/082021].
Dynamic testing and characterization of advanced materials in a new experiment at CERN HiRadMat facility
Pasquali M.;
2018
Abstract
An innovative and comprehensive experiment (named "Multimat") was successfully carried out at CERN HiRadMat facility on 18 different materials relevant for Collimators and Beam Intercepting Devices. Material samples, tested under high intensity proton pulses of 440 GeV/c, exceeding the energy density expected in HL-LHC, ranged from very light carbon foams to tungsten heavy alloys, including novel composites as graphite/carbides and metal/diamond without and with thin-film coatings. Experimental data were acquired relying on extensive integrated instrumentation (strain gauges, temperature sensors, radiation-hard camera) and on laser Doppler vibrometer. This allows investigating relatively unexplored and fundamental phenomena as dynamic strength, internal energy dispersion, nonlinearities due to inelasticity and inhomogeneity, strength and delamination of coatings and surfaces. By benchmarking sophisticated numerical simulations against these results, it is possible to establish or update material constitutive models, which are of paramount importance for the design of devices exposed to interaction with particle beams in high-energy accelerators such as the HL-LHC or FCC-hh.| File | Dimensione | Formato | |
|---|---|---|---|
|
Bertarelli_dynamic-testing_2018.pdf
accesso aperto
Note: https://iopscience.iop.org/article/10.1088/1742-6596/1067/8/082021
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Creative commons
Dimensione
1.54 MB
Formato
Adobe PDF
|
1.54 MB | Adobe PDF |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
