Radiation protection considerations on radon and building materials radioactivity in Near Zero Energy Buildings

Recent updates of the E.U. Basic Safety Standards, stated in the Council Directive 2013/59/EURATOM, are focusing on risks related to radon gas concentration inside dwellings and working places, as well as radioactivity of building materials. In particular, the new E.U. Basic Safety Standards are based on last recommendations from the International Commission on Radiological Protection (ICRP), and from the World Health Organization (WHO), which consider that radon issues, and external irradiation from building material, as topic aspects to population’s health. Further, ICRP Publication 126, by using bio-kinetics models for estimating the effects of radon intakes, has drastically reduced the reference level for radon concentration in dwellings and working places. Radon issues have recently gained particular attention due to current orientations in constructing buildings with energy consumptions lower and lower. Radon gas emerges from the ground, penetrates building’s basements, and accumulates itself into the indoor air, being breathed by people. Taking care of windows’ airtightness allows the radon concentration to build up, in some cases beyond reference levels, together with other chemical pollutants, i.e. combustion residues and solvents. On considering that Council Directive 2013/59 EURATOM has to be transposed into law by each EU Member State by February 2018, it is recommended that radon issues have to be considered during the design phase of the building construction, particularly for NZEB applications. Further, external irradiation from building materials, i.e. tuff, marbles, tiles, pozzolana, coal ashes and so on, may be a reason of concern also. This paper describes radiation protection issues focusing on public and domestic environments, where people are supposed to spend a considerable amount of time. About radon, real measurements are shown, both in domestic and working scenarios. Dealing with external irradiation due to building materials, calculations and simulations have been performed and results are presented.