New flexible aliphatic oxazolidone-isocyanurate networks (AISOX) are obtained by reacting a low molecular weight diisocyanate (4,4-methylene dicyclohexyl diisocyanate, H12MDI) and a macro-diepoxyde (poly(ethylene glycol) diglycidyl ether, M-n=526, PEGDGE) in different molar ratio. The curing reaction, carried out from 25 degrees C to 200 degrees C, is studied by using DSC and FTIR. The effect of the molar ratio of the two monomers on thermal and mechanical properties of AISOX resins is investigated by DSC, thermogravimetric analysis, stress-strain measurements and optical microscopy. Independently from the feed composition, it is observed that the reaction steps are: (i) partial hydrolysis of isocyanate caused by water traces, (ii) incomplete trimerization of isocyanate to give isocyanurate, and (iii) formation of oxazolidone and complete conversion of isocyanate. At the highest concentration of the soft macrodiepoxyde (PEGDGE), the AISOX resin is in the rubbery state at room temperature and shows an elastomeric behavior. (c) 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43404.
Flexible aliphatic poly(isocyanurate-oxazolidone) resins based on poly(ethylene glycol) diglycidyl ether and 4,4′-methylene dicyclohexyl diisocyanate / Bakry, Ahmed; Aversano, Renato; D'Ilario, Lucio; DI LISIO, Valerio; Francolini, Iolanda; Piozzi, Antonella; Martinelli, Andrea. - In: JOURNAL OF APPLIED POLYMER SCIENCE. - ISSN 0021-8995. - STAMPA. - 133:19(2016). [10.1002/APP.43404]
Flexible aliphatic poly(isocyanurate-oxazolidone) resins based on poly(ethylene glycol) diglycidyl ether and 4,4′-methylene dicyclohexyl diisocyanate
D'ILARIO, LUCIO;DI LISIO, VALERIO;FRANCOLINI, IOLANDA;PIOZZI, Antonella;MARTINELLI, Andrea
2016
Abstract
New flexible aliphatic oxazolidone-isocyanurate networks (AISOX) are obtained by reacting a low molecular weight diisocyanate (4,4-methylene dicyclohexyl diisocyanate, H12MDI) and a macro-diepoxyde (poly(ethylene glycol) diglycidyl ether, M-n=526, PEGDGE) in different molar ratio. The curing reaction, carried out from 25 degrees C to 200 degrees C, is studied by using DSC and FTIR. The effect of the molar ratio of the two monomers on thermal and mechanical properties of AISOX resins is investigated by DSC, thermogravimetric analysis, stress-strain measurements and optical microscopy. Independently from the feed composition, it is observed that the reaction steps are: (i) partial hydrolysis of isocyanate caused by water traces, (ii) incomplete trimerization of isocyanate to give isocyanurate, and (iii) formation of oxazolidone and complete conversion of isocyanate. At the highest concentration of the soft macrodiepoxyde (PEGDGE), the AISOX resin is in the rubbery state at room temperature and shows an elastomeric behavior. (c) 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43404.File | Dimensione | Formato | |
---|---|---|---|
Bakry_Flexible_2016.pdf
solo gestori archivio
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
819.9 kB
Formato
Adobe PDF
|
819.9 kB | Adobe PDF | Contatta l'autore |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.