In this paper, the dynamics of a cantilever beam subjected to harmonic excitations and to the contact of an obstacle is studied with the help of experimental and numerical investigations. The steel flexible structure is excited close to the free end with a shaker and may come into contact with a deformable and dissipative obstacle. A technique for modeling contact phenomena using piece-wise linear dynamics is applied. A finite-dimensional modal model is developed through a Galerkin projection. Concentrated masses, dampers and forces are considered in the equations of motion in such a way that the boundary conditions are those of a cantilever beam. Numerical studies are conducted by assuming finite-time contact duration to investigate the frequency response of the impacted beam for different driving frequencies. Experimental results have been extrapolated through a displacement laser sensor and a load cell. The comparison between numerical and experimental results show many qualitative and quantitative similarities. The novelty of this paper can be synthetized in a) the development of experimental results that are in good agreement with the numerical implementation of the introduced model; b) the development of a comprehensive contact model of the beam with an unilateral, deformable and dissipative obstacle located close to the tip; c) the possibility of accounting for higher modes for the cantilever beam problem, and hence of analyzing how the response varies when moving the excitation (and/or the obstacle) along the beam, and of investigating the effect of the linearly elastic deformability of the built‐in end of the beam; d) an easy and intuitive solution to the problem of accounting for spatially singular masses, dampers, springs and forces in the motion equations; e) the possibility of accounting for finite gap and duration of the contact between beam and obstacle.
Experimental and numerical investigations of the responses of a cantilever beam possibly contacting a deformable and dissipative obstacle under harmonic excitation / Andreaus, Ugo; Baragatti, Paolo; Placidi, Luca. - In: INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS. - ISSN 0020-7462. - STAMPA. - 80:(2016), pp. 96-106. [10.1016/j.ijnonlinmec.2015.10.007]
Experimental and numerical investigations of the responses of a cantilever beam possibly contacting a deformable and dissipative obstacle under harmonic excitation
ANDREAUS, Ugo
;
2016
Abstract
In this paper, the dynamics of a cantilever beam subjected to harmonic excitations and to the contact of an obstacle is studied with the help of experimental and numerical investigations. The steel flexible structure is excited close to the free end with a shaker and may come into contact with a deformable and dissipative obstacle. A technique for modeling contact phenomena using piece-wise linear dynamics is applied. A finite-dimensional modal model is developed through a Galerkin projection. Concentrated masses, dampers and forces are considered in the equations of motion in such a way that the boundary conditions are those of a cantilever beam. Numerical studies are conducted by assuming finite-time contact duration to investigate the frequency response of the impacted beam for different driving frequencies. Experimental results have been extrapolated through a displacement laser sensor and a load cell. The comparison between numerical and experimental results show many qualitative and quantitative similarities. The novelty of this paper can be synthetized in a) the development of experimental results that are in good agreement with the numerical implementation of the introduced model; b) the development of a comprehensive contact model of the beam with an unilateral, deformable and dissipative obstacle located close to the tip; c) the possibility of accounting for higher modes for the cantilever beam problem, and hence of analyzing how the response varies when moving the excitation (and/or the obstacle) along the beam, and of investigating the effect of the linearly elastic deformability of the built‐in end of the beam; d) an easy and intuitive solution to the problem of accounting for spatially singular masses, dampers, springs and forces in the motion equations; e) the possibility of accounting for finite gap and duration of the contact between beam and obstacle.File | Dimensione | Formato | |
---|---|---|---|
Andreaus_ExperimentalAndNumerical _2016.pdf
solo gestori archivio
Note: https://www.sciencedirect.com/science/article/pii/S0020746215002012
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
1.52 MB
Formato
Adobe PDF
|
1.52 MB | Adobe PDF | Contatta l'autore |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.