Numerical simulation of site effects in the upper aterno valley array during the aftershock sequence of the 2009 L'Aquila earthquake

On April 6th, 2009 a Mw=6.3 earthquake jolted the Abruzzo region of Central Italy, very close to the urban center of L'Aquila. Availability of high-quality recordings of the mainshock along with several aftershocks makes the seismic sequence the best recordednear-source events in Italy. In the present study, attention is devoted to the strong motion recordings of the upper Aterno River Valley array, which is part of the Italian Accelerometric Network (Rete Accelerometrica Nazionale, RAN), deployed NW of L'Aquila. These data provide a better understanding of the role played by site effects in the seismic response of the valley in epicentral area. This was accomplished by comparing recordings with the results of 1D and 2D site response analyses. The subsoil model of the Aterno Valley passing through the accelerometric stations was assumed from a previous study and was integrated with the results of dynamic tests carried out on reconstituted samples of coarse materials frequently encountered in the subsoil. First, the ground surface motion computed by assuming linear soil behavior was compared to the small-magnitude (ML=3-3.5) aftershocks recordings. It was found that 2D modeling provides a satisfactory understanding of the amplification phenomena in the array. Moreover, 2D analyses performed slightly better than 1D predictions. Based on this calibration study, further site response analyses were carried out and the computed ground motion was compared with the aftershock recordings of moderate magnitude (MW=4-5.6). In contrast, the results from these events do not show the analogous performance as obtained in the linear range. More specifically, shape of acceleration response spectra is generally satisfactorily simulated whereas discrepancies are observed in terms of PGA as well as maximum spectral amplitude. It is speculated on the possible explanations of these discrepancies.