The Young's modulus and the elastic energy dissipation of polyethylene oxide (PEO)-based lithium battery electrolyte membranes have been studied in this work. The membranes, formed by pure PEO and doped by LiCF3SO3, Li2S and ZrO2, were studied within a 90 K - 400 K temperature range. We observed the glass transition around 230 K and the first-order phase transformation from the crystalline to the amorphous phase around 330 K on heating. We also measured the isothermal kinetics of the transition from the amorphous to the crystalline state and found that it is slower in doped PEO. Moreover, we showed that for both samples the transformation becomes slower as the temperature increases between 319 and 331 K. The experimental results suggest that the amorphous state is stable at 331 K for a few hours before the transformation takes place. Finally, the moisture effects on the mechanical properties of pure and doped PEO membranes are reported.

Phase Transitions in Polymers for Lithium Batteries / Paolone, Annalisa; Palumbo, Oriele; Teocoli, Francesca; Cantelli, Rosario; Hassoun, Jusef. - In: DIFFUSION AND DEFECT DATA, SOLID STATE DATA. PART B, SOLID STATE PHENOMENA. - ISSN 1012-0394. - 184:(2012), pp. 351-354. (Intervento presentato al convegno 16th International Conference on Internal Friction and Mechanical Spectroscopy (ICIFMS-16) tenutosi a Lausanne, SWITZERLAND nel JUL 03-08, 2011) [10.4028/www.scientific.net/ssp.184.351].

Phase Transitions in Polymers for Lithium Batteries

PAOLONE, Annalisa;PALUMBO, Oriele;TEOCOLI, FRANCESCA;CANTELLI, Rosario;HASSOUN, JUSEF
2012

Abstract

The Young's modulus and the elastic energy dissipation of polyethylene oxide (PEO)-based lithium battery electrolyte membranes have been studied in this work. The membranes, formed by pure PEO and doped by LiCF3SO3, Li2S and ZrO2, were studied within a 90 K - 400 K temperature range. We observed the glass transition around 230 K and the first-order phase transformation from the crystalline to the amorphous phase around 330 K on heating. We also measured the isothermal kinetics of the transition from the amorphous to the crystalline state and found that it is slower in doped PEO. Moreover, we showed that for both samples the transformation becomes slower as the temperature increases between 319 and 331 K. The experimental results suggest that the amorphous state is stable at 331 K for a few hours before the transformation takes place. Finally, the moisture effects on the mechanical properties of pure and doped PEO membranes are reported.
2012
crystallization transition; glass transition; mechanical spectroscopy; peo; polymeric lithium ion batteries
01 Pubblicazione su rivista::01a Articolo in rivista
Phase Transitions in Polymers for Lithium Batteries / Paolone, Annalisa; Palumbo, Oriele; Teocoli, Francesca; Cantelli, Rosario; Hassoun, Jusef. - In: DIFFUSION AND DEFECT DATA, SOLID STATE DATA. PART B, SOLID STATE PHENOMENA. - ISSN 1012-0394. - 184:(2012), pp. 351-354. (Intervento presentato al convegno 16th International Conference on Internal Friction and Mechanical Spectroscopy (ICIFMS-16) tenutosi a Lausanne, SWITZERLAND nel JUL 03-08, 2011) [10.4028/www.scientific.net/ssp.184.351].
File allegati a questo prodotto
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/443058
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 5
  • ???jsp.display-item.citation.isi??? 5
social impact