CARTOSAT-1, launched in May 2005, is basically a stereo mission, as it is equipped with two cameras onboard, namely Aft and Fore, tilted along track by -5 degrees and +26 degrees respectively, allowing the acquisition of stereo data with a resolution of 2.5 m. The Institute "Area di Geodesia e Geomatica" at Sapienza Universita di Roma, Eurimage S.p.A. and the former CyberCity AG participated at the ISPRS-ISRO Cartosat-1 Scientific Assessment Programme (C-SAP), in order to investigate the generation of Digital Surface Models (DSMs) from Cartosat-1 stereo scenes. The paper describes the work carried out during the summer of 2006, on the stereopair belonging to the test field called TS-8, acquired on 8th June 2005 over the city of Rome, Italy. The processing included the sensor orientation, Digital Surface Model (DSM) generation, orthoimage production and 3D features extraction. For the evaluation of the DSM, orthophoto and 3D feature accuracy, a large scale 3D map (1:2'000) was used.

Orientation of Cartosat-1 Stereo Imagery / Crespi, Mattia Giovanni; Fratarcangeli, Francesca; Giannone, Francesca; K., Jacobsen; Pieralice, Francesca. - ELETTRONICO. - 2:(2008), pp. 14-20. (Intervento presentato al convegno EARSeL Joint Workshop: Remote Sensing - New Challenges of High Resolution tenutosi a Bochum; Germany).

Orientation of Cartosat-1 Stereo Imagery

CRESPI, Mattia Giovanni;FRATARCANGELI, Francesca;GIANNONE, FRANCESCA;PIERALICE, FRANCESCA
2008

Abstract

CARTOSAT-1, launched in May 2005, is basically a stereo mission, as it is equipped with two cameras onboard, namely Aft and Fore, tilted along track by -5 degrees and +26 degrees respectively, allowing the acquisition of stereo data with a resolution of 2.5 m. The Institute "Area di Geodesia e Geomatica" at Sapienza Universita di Roma, Eurimage S.p.A. and the former CyberCity AG participated at the ISPRS-ISRO Cartosat-1 Scientific Assessment Programme (C-SAP), in order to investigate the generation of Digital Surface Models (DSMs) from Cartosat-1 stereo scenes. The paper describes the work carried out during the summer of 2006, on the stereopair belonging to the test field called TS-8, acquired on 8th June 2005 over the city of Rome, Italy. The processing included the sensor orientation, Digital Surface Model (DSM) generation, orthoimage production and 3D features extraction. For the evaluation of the DSM, orthophoto and 3D feature accuracy, a large scale 3D map (1:2'000) was used.
2008
EARSeL Joint Workshop: Remote Sensing - New Challenges of High Resolution
Cartosat-1; stereo orientation; DSM extraction; 3D features extraction; model and software comparison; accuracy assessment
04 Pubblicazione in atti di convegno::04b Atto di convegno in volume
Orientation of Cartosat-1 Stereo Imagery / Crespi, Mattia Giovanni; Fratarcangeli, Francesca; Giannone, Francesca; K., Jacobsen; Pieralice, Francesca. - ELETTRONICO. - 2:(2008), pp. 14-20. (Intervento presentato al convegno EARSeL Joint Workshop: Remote Sensing - New Challenges of High Resolution tenutosi a Bochum; Germany).
File allegati a questo prodotto
File Dimensione Formato  
Crespi_Orientation-of-cartosat-1-stereo-imagery_2008.pdf

solo gestori archivio

Note: contributo
Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 369.87 kB
Formato Adobe PDF
369.87 kB Adobe PDF   Contatta l'autore

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/367036
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact