Fibre heating can be employed to optimise composite fabrication in hand lamination. In order to show the fibre heating effect on the properties of hand laminated composites, dynamical and mechanical tests were performed on simply cured glass fibre reinforced laminates and on treated ones. In this second case the fibre content was heated before composite lamination by means of a hot parallel plate press. All the specimens were room temperature cured. A significant increase in storage modulus was observed as an effect of fibre heating as well as a data dispersion reduction. Additionally a lower thickness was measured due to the higher resin fluidity. Copyright © 2006 by ASME.
Influence of fibre heating in PMC production technology / Gisario, Annamaria; Quadrini, F; Tagliaferri, V.. - STAMPA. - Volume 2006:(2006). (Intervento presentato al convegno 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2006 tenutosi a Torino; Italy).
Influence of fibre heating in PMC production technology
GISARIO, ANNAMARIA;
2006
Abstract
Fibre heating can be employed to optimise composite fabrication in hand lamination. In order to show the fibre heating effect on the properties of hand laminated composites, dynamical and mechanical tests were performed on simply cured glass fibre reinforced laminates and on treated ones. In this second case the fibre content was heated before composite lamination by means of a hot parallel plate press. All the specimens were room temperature cured. A significant increase in storage modulus was observed as an effect of fibre heating as well as a data dispersion reduction. Additionally a lower thickness was measured due to the higher resin fluidity. Copyright © 2006 by ASME.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
