Molten Carbonate Fuel Cells (MCFCs) are a commercially available technology that is primarily used for decentralized power generation, as well as a carbon capture device capable of producing electricity while simultaneously capturing CO2. Among the various types of fuel cells, MCFCs typically incorporate thick electrolytes, which helps to minimize gas cross-over and extend their lifetime, although this results in lower current density efficiency. The molten salt electrolyte is conventionally held into a porous, chemically inert α- or γ-LiAlO2 matrix being traditionally prepared via tape casting methods. Since minimizing the thickness of the MCFC matrix is a highly complex challenge, this work presents a novel pore engineering approach aimed at enhancing matrix performance, while maintaining a standard thick design. The strategy involves altering the matrix porous structure from the ordinary sub-micron (100-400 nm) to the mesoporous region (2-50 nm) to leverage a high ion conductivity “composite electrolyte” effect within an otherwise standard γ-LiAlO2 matrix. Guided by the Hansen solubility theory, an optimal and eco-friendly slurry composition was developed leading to creation of a γ-LiAlO2 matrix with high mesoporous structure and overall porosity above 70 vol%. Electrochemical performance of the novel mesoporous matrix was tested in button cell experiments conducted under standard gas conditions at 650°C. According to polarization curve and impedance spectra analysis, cells incorporating the mesoporous matrix showed an impressive reduction in both ohmic and polarization losses. After a two-week operation, a peak power density of 270 mW/cm2 was measured on a cell built with a 450 μm-thick mesoporous matrix, which was more than twice compared to a MCFC cell assembled with a conventional porous matrix. Although analysis of the ion transport mechanisms was beyond the purpose of this work, the present electrochemical findings provide substantial evidence that an excellent “composite electrolyte” effect can be obtained in a standard thick LiAlO2 matrix when mesoporosity is introduced in the structure. The proposed matrix pore engineering approach is thus believed to offer new perspectives for the practical development of higher power density MCFC cells.

A γ-LiAlO2 matrix with A novel mesoporous structure for higher performance molten carbonate fuel cells / Frangini, S., Irfan, N., Aurora, A., Della Pietra, M., Della Seta, L., Astiaso Garcia, D., Gwis, A., Lo Conte, S., Pérez Trujillo, J.P., Lagergren, C.. - In: INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. - ISSN 0360-3199. - 266:(2026). [10.1016/j.ijhydene.2026.156998]

A γ-LiAlO2 matrix with A novel mesoporous structure for higher performance molten carbonate fuel cells

Aurora, Annalisa;Astiaso Garcia, Davide;Gwis, Alessia;Lo Conte, Silvia;
2026

Abstract

Molten Carbonate Fuel Cells (MCFCs) are a commercially available technology that is primarily used for decentralized power generation, as well as a carbon capture device capable of producing electricity while simultaneously capturing CO2. Among the various types of fuel cells, MCFCs typically incorporate thick electrolytes, which helps to minimize gas cross-over and extend their lifetime, although this results in lower current density efficiency. The molten salt electrolyte is conventionally held into a porous, chemically inert α- or γ-LiAlO2 matrix being traditionally prepared via tape casting methods. Since minimizing the thickness of the MCFC matrix is a highly complex challenge, this work presents a novel pore engineering approach aimed at enhancing matrix performance, while maintaining a standard thick design. The strategy involves altering the matrix porous structure from the ordinary sub-micron (100-400 nm) to the mesoporous region (2-50 nm) to leverage a high ion conductivity “composite electrolyte” effect within an otherwise standard γ-LiAlO2 matrix. Guided by the Hansen solubility theory, an optimal and eco-friendly slurry composition was developed leading to creation of a γ-LiAlO2 matrix with high mesoporous structure and overall porosity above 70 vol%. Electrochemical performance of the novel mesoporous matrix was tested in button cell experiments conducted under standard gas conditions at 650°C. According to polarization curve and impedance spectra analysis, cells incorporating the mesoporous matrix showed an impressive reduction in both ohmic and polarization losses. After a two-week operation, a peak power density of 270 mW/cm2 was measured on a cell built with a 450 μm-thick mesoporous matrix, which was more than twice compared to a MCFC cell assembled with a conventional porous matrix. Although analysis of the ion transport mechanisms was beyond the purpose of this work, the present electrochemical findings provide substantial evidence that an excellent “composite electrolyte” effect can be obtained in a standard thick LiAlO2 matrix when mesoporosity is introduced in the structure. The proposed matrix pore engineering approach is thus believed to offer new perspectives for the practical development of higher power density MCFC cells.
2026
Composite electrolyte; Hansen solubility theory; Lithium aluminate; Mesoporous matrix; Molten carbonate fuel cell; Tape casting
01 Pubblicazione su rivista::01a Articolo in rivista
A γ-LiAlO2 matrix with A novel mesoporous structure for higher performance molten carbonate fuel cells / Frangini, S., Irfan, N., Aurora, A., Della Pietra, M., Della Seta, L., Astiaso Garcia, D., Gwis, A., Lo Conte, S., Pérez Trujillo, J.P., Lagergren, C.. - In: INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. - ISSN 0360-3199. - 266:(2026). [10.1016/j.ijhydene.2026.156998]
File allegati a questo prodotto
File Dimensione Formato  
Frangini_IJHE_A γ-LiAlO2_2026.pdf

solo gestori archivio

Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 5.84 MB
Formato Adobe PDF
5.84 MB Adobe PDF   Contatta l'autore

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1779771
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact