The inner wet surfaces of water-cooled systems in nuclear reactors can release corrosion products (CP), which can become activated corrosion products (ACP) under neutron irradiation, posing radiological and structural risks. While ACP behaviour is well-studied in fission reactors, data for fusion systems like ITER and DEMO is scarce due to unique conditions: different radiation fields, magnetic effects, high coolant flow rates and materials such as EUROFER-97 and CuCrZr. Understanding ACP formation, release, and transport under these fusion-specific conditions is critical for accurate modelling and safety assessments. To address this gap, UKAEA, the University of Birmingham, and EUROfusion are developing an experimental flow loop to study Flow-Accelerated Corrosion (FAC) and ACP under fusion-relevant water chemistry and fluid dynamics. The facility may be integrated with the neutron source of the University of Birmingham to simulate irradiation effects. This study includes 3D neutronics analysis using MCNP6.3, inventory calculations with FISPACT-II, and ACP modelling via OSCAR-Fusion. Key outcomes cover neutron fluxes, nuclear heating, radiation damage, gas production, specific activity, radiolysis, water chemistry control, corrosion-release rates, and ACP quantities. These findings guide facility design and commissioning, emphasizing the integration of neutronics and radiolysis for comprehensive ACP characterization under fusion environments.
Neutronics, radiolysis and OSCAR-Fusion analysis for the design of a flow loop for Activated Corrosion Products studies / Noce, S., Bailey, G., Butt, L., Chiu, Y.-L., Colangeli, A., Dacquait, F., Damiano, M., Flammini, D., Fonnesu, N., Gilbert, M.R., Lim, J.J.H., Litaudon, X., Lombardi, V., Lungaroni, M., Moro, F., Previti, A., Sartorio, C., Terranova, N., Villari, R., Volpe, L., et al.. - In: FUSION ENGINEERING AND DESIGN. - ISSN 0920-3796. - 231:(2026), pp. 1-15. [10.1016/j.fusengdes.2026.115911]
Neutronics, radiolysis and OSCAR-Fusion analysis for the design of a flow loop for Activated Corrosion Products studies
Lombardi, V.;
2026
Abstract
The inner wet surfaces of water-cooled systems in nuclear reactors can release corrosion products (CP), which can become activated corrosion products (ACP) under neutron irradiation, posing radiological and structural risks. While ACP behaviour is well-studied in fission reactors, data for fusion systems like ITER and DEMO is scarce due to unique conditions: different radiation fields, magnetic effects, high coolant flow rates and materials such as EUROFER-97 and CuCrZr. Understanding ACP formation, release, and transport under these fusion-specific conditions is critical for accurate modelling and safety assessments. To address this gap, UKAEA, the University of Birmingham, and EUROfusion are developing an experimental flow loop to study Flow-Accelerated Corrosion (FAC) and ACP under fusion-relevant water chemistry and fluid dynamics. The facility may be integrated with the neutron source of the University of Birmingham to simulate irradiation effects. This study includes 3D neutronics analysis using MCNP6.3, inventory calculations with FISPACT-II, and ACP modelling via OSCAR-Fusion. Key outcomes cover neutron fluxes, nuclear heating, radiation damage, gas production, specific activity, radiolysis, water chemistry control, corrosion-release rates, and ACP quantities. These findings guide facility design and commissioning, emphasizing the integration of neutronics and radiolysis for comprehensive ACP characterization under fusion environments.| File | Dimensione | Formato | |
|---|---|---|---|
|
Noce_Neutronics, radiolysis and_2026.pdf
solo gestori archivio
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
7.9 MB
Formato
Adobe PDF
|
7.9 MB | Adobe PDF | Contatta l'autore |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.


