International Thermonuclear Experimental Reactor (ITER) diagnostic equatorial port plugs (EPPs) are located in the vacuum vessel equatorial ports (EQs), directly facing the plasma, thus exposed to intense neutron irradiation produced by the fusion reactions. Neutron irradiation results in both heat deposition and long-term activation of port plug structural materials. This work presents activation analyses in support of the ITER Diagnostic EPPs #2, #8 and #12, which host different diagnostics systems. Three-dimensional neutronic analyses were performed by means of D1SUNED 3.1.4 rev.2 tool based on the Monte Carlo neutron particles (MCNP) Monte Carlo code, using detailed port plug models embedded in proper sectors of the ITER reference MCNP model. These simulations provided neutron flux energy spectra within the port plugs and their subcomponents, represented in 175 VITAMIN-J energy groups. The resulting spectra have been used as input for the activation calculations carried out with FISPACT-II inventory code, employing TENDL-2017 nuclear data libraries and the SA2 ITER reference operational scenario. Specific activity, decay heat, and contact dose rate of the port plugs components have been calculated after the machine shutdown for different cooling times, extending up to 104 years. This article presents the activation analysis results for the components of the selected EPP, with a focus on time-dependent behavior, highlighting major similarities and differences in activation responses and characteristics.
Activation analyses in support of the integration of the ITER diagnostic equatorial ports / Lungaroni, M., Flammini, D., Colangeli, A., Damiano, M., Loreti, S., Fonnesu, N., Moro, F., Noce, S., Previti, A., Lombardi, V., Villari, R., Pavel, S., Soro, S., Curiano, F.. - In: IEEE TRANSACTIONS ON PLASMA SCIENCE. - ISSN 0093-3813. - 54:6(2026), pp. 2698-2703. [10.1109/tps.2026.3674602]
Activation analyses in support of the integration of the ITER diagnostic equatorial ports
Lombardi, V.;
2026
Abstract
International Thermonuclear Experimental Reactor (ITER) diagnostic equatorial port plugs (EPPs) are located in the vacuum vessel equatorial ports (EQs), directly facing the plasma, thus exposed to intense neutron irradiation produced by the fusion reactions. Neutron irradiation results in both heat deposition and long-term activation of port plug structural materials. This work presents activation analyses in support of the ITER Diagnostic EPPs #2, #8 and #12, which host different diagnostics systems. Three-dimensional neutronic analyses were performed by means of D1SUNED 3.1.4 rev.2 tool based on the Monte Carlo neutron particles (MCNP) Monte Carlo code, using detailed port plug models embedded in proper sectors of the ITER reference MCNP model. These simulations provided neutron flux energy spectra within the port plugs and their subcomponents, represented in 175 VITAMIN-J energy groups. The resulting spectra have been used as input for the activation calculations carried out with FISPACT-II inventory code, employing TENDL-2017 nuclear data libraries and the SA2 ITER reference operational scenario. Specific activity, decay heat, and contact dose rate of the port plugs components have been calculated after the machine shutdown for different cooling times, extending up to 104 years. This article presents the activation analysis results for the components of the selected EPP, with a focus on time-dependent behavior, highlighting major similarities and differences in activation responses and characteristics.| File | Dimensione | Formato | |
|---|---|---|---|
|
Lungaroni_Activation Analyses in Support_2026.pdf
solo gestori archivio
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
1.17 MB
Formato
Adobe PDF
|
1.17 MB | Adobe PDF | Contatta l'autore |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.


