This study presents a wireless, non-invasive sensing system for monitoring the dielectric permittivity of materials, with a particular focus on applications in cultural heritage conservation. The system integrates a passive split-ring resonator tag, electromagnetically coupled to a compact antipodal Vivaldi antenna, operating in the reactive near-field region. Both numerical simulations and experimental measurements demonstrate that shifts in the antenna’s reflection coefficient resonance frequency correlate with variations in the dielectric permittivity of the material under test. A calibration curve was established using reference materials—including low-density polyvinylchloride, polytetrafluoroethylene, polymethyl methacrylate, and polycarbonate—and validated through precise permittivity measurements. The system was subsequently applied to wood samples (fir, poplar, beech, and oak) at different humidity levels, revealing a sigmoidal relationship between moisture content and permittivity. The behavior was also confirmed using a portable and low-cost setup, consisting of a point-like coaxial sensor that could be easily moved and positioned as needed, enabling localized measurements on specific areas of interest of the sample, together with a miniaturized Vector Network Analyzer. These results underscore the potential of this portable, contactless, and scalable sensing platform for real-world monitoring of cultural heritage materials, enabling minimally invasive assessment of their structural and historical integrity. Moreover, by enabling the estimation of moisture content through dielectric permittivity, the system provides an effective method for early detection of water-induced deterioration in wood-based heritage items. This capability is particularly valuable for preventive conservation, as excessive moisture—often indicated by permittivity values above critical thresholds—can trigger biological or structural degradation.

Non-Destructive Permittivity and Moisture Analysis in Wooden Heritage Conservation Using Split Ring Resonators and Coaxial Probe / Pittella, Erika; Cannazza, Giuseppe; Cataldo, Andrea; Cavagnaro, Marta; D'Alvia, Livio; Masciullo, Antonio; Schiavoni, Raissa; Piuzzi, Emanuele. - In: SENSORS. - ISSN 1424-8220. - 25:16(2025). [10.3390/s25164947]

Non-Destructive Permittivity and Moisture Analysis in Wooden Heritage Conservation Using Split Ring Resonators and Coaxial Probe

Pittella, Erika
;
Cavagnaro, Marta;D'Alvia, Livio
Writing – Original Draft Preparation
;
Piuzzi, Emanuele
2025

Abstract

This study presents a wireless, non-invasive sensing system for monitoring the dielectric permittivity of materials, with a particular focus on applications in cultural heritage conservation. The system integrates a passive split-ring resonator tag, electromagnetically coupled to a compact antipodal Vivaldi antenna, operating in the reactive near-field region. Both numerical simulations and experimental measurements demonstrate that shifts in the antenna’s reflection coefficient resonance frequency correlate with variations in the dielectric permittivity of the material under test. A calibration curve was established using reference materials—including low-density polyvinylchloride, polytetrafluoroethylene, polymethyl methacrylate, and polycarbonate—and validated through precise permittivity measurements. The system was subsequently applied to wood samples (fir, poplar, beech, and oak) at different humidity levels, revealing a sigmoidal relationship between moisture content and permittivity. The behavior was also confirmed using a portable and low-cost setup, consisting of a point-like coaxial sensor that could be easily moved and positioned as needed, enabling localized measurements on specific areas of interest of the sample, together with a miniaturized Vector Network Analyzer. These results underscore the potential of this portable, contactless, and scalable sensing platform for real-world monitoring of cultural heritage materials, enabling minimally invasive assessment of their structural and historical integrity. Moreover, by enabling the estimation of moisture content through dielectric permittivity, the system provides an effective method for early detection of water-induced deterioration in wood-based heritage items. This capability is particularly valuable for preventive conservation, as excessive moisture—often indicated by permittivity values above critical thresholds—can trigger biological or structural degradation.
2025
antipodal Vivaldi antenna; cultural heritage monitoring; dielectric permittivity; non-invasive measurement; split ring resonator; wireless sensing
01 Pubblicazione su rivista::01a Articolo in rivista
Non-Destructive Permittivity and Moisture Analysis in Wooden Heritage Conservation Using Split Ring Resonators and Coaxial Probe / Pittella, Erika; Cannazza, Giuseppe; Cataldo, Andrea; Cavagnaro, Marta; D'Alvia, Livio; Masciullo, Antonio; Schiavoni, Raissa; Piuzzi, Emanuele. - In: SENSORS. - ISSN 1424-8220. - 25:16(2025). [10.3390/s25164947]
File allegati a questo prodotto
File Dimensione Formato  
Pittella_Non-Destructive Permittivity_2025.pdf

accesso aperto

Note: articolo con cover
Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Creative commons
Dimensione 917.19 kB
Formato Adobe PDF
917.19 kB Adobe PDF

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1744787
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact