Condition monitoring of the running gear of metro trainsets has been receiving increasing interest in recent years due to its potential for cost reduction and safety assurance. In fact, condition-monitoring systems (CMS) may be used (a) for the early identification of component faults (health monitoring), and (b) for in-service load monitoring. This paper describes the part of the research work performed in the SHIFT2RAIL-funded RUN2Rail project addressed to use (a). The focus is on the exploitation of the CMS to reduce the unavailability of trainsets and/or of service disruptions. This fits into the current general trend for railways towards condition-based maintenance (CBM) of assets, which has become a sector-wide need. Various technologies are available or under development for this purpose. It is assumed here that monitoring of health indicators is performed on a number of wheelsets, gearboxes and suspension elements of a case study trainset type of Metro de Madrid’s fleet. The convenience of installing, or not, the systems is assessed based on the observed component failure rates, as input to a bespoke fault-tree analysis (FTA) approach. The probability of occurrence of events that may lead to trainset or service unavailability is taken as top event of the fault tree; it is calculated with different assumptions regarding the probability of detection (POD) of the monitoring systems and the probability that a given component fault will generate unavailability. The corresponding variation of unavailability costs (with/without CMS) is quantified through appropriate penalty costs. The main results are the methodology per se, with indications of which indicators should be monitored as an input to this type of convenience assessment. The method and the results are valuable for metropolitan railway operators in assessing the convenience of adopting condition monitoring systems in their new or existing rolling stock.

Convenience of running-gear health monitoring systems to reduce unavailability in metropolitan railways / Licciardello, R.; Sapienza, A.; Garcia-Loygorri, J. M.; Jarillo, J. M.; Alvarez-Monteserin, J. A. C.. - 200:(2020), pp. 25-34. (Intervento presentato al convegno Urban Transport XXVI tenutosi a online (COVID-19 pandemic)) [10.2495/UT200031].

Convenience of running-gear health monitoring systems to reduce unavailability in metropolitan railways

Licciardello R.
Writing – Original Draft Preparation
;
2020

Abstract

Condition monitoring of the running gear of metro trainsets has been receiving increasing interest in recent years due to its potential for cost reduction and safety assurance. In fact, condition-monitoring systems (CMS) may be used (a) for the early identification of component faults (health monitoring), and (b) for in-service load monitoring. This paper describes the part of the research work performed in the SHIFT2RAIL-funded RUN2Rail project addressed to use (a). The focus is on the exploitation of the CMS to reduce the unavailability of trainsets and/or of service disruptions. This fits into the current general trend for railways towards condition-based maintenance (CBM) of assets, which has become a sector-wide need. Various technologies are available or under development for this purpose. It is assumed here that monitoring of health indicators is performed on a number of wheelsets, gearboxes and suspension elements of a case study trainset type of Metro de Madrid’s fleet. The convenience of installing, or not, the systems is assessed based on the observed component failure rates, as input to a bespoke fault-tree analysis (FTA) approach. The probability of occurrence of events that may lead to trainset or service unavailability is taken as top event of the fault tree; it is calculated with different assumptions regarding the probability of detection (POD) of the monitoring systems and the probability that a given component fault will generate unavailability. The corresponding variation of unavailability costs (with/without CMS) is quantified through appropriate penalty costs. The main results are the methodology per se, with indications of which indicators should be monitored as an input to this type of convenience assessment. The method and the results are valuable for metropolitan railway operators in assessing the convenience of adopting condition monitoring systems in their new or existing rolling stock.
2020
Urban Transport XXVI
condition monitoring system (CMS), health monitoring system (HMS), metro, railway, operating costs, unavailability
04 Pubblicazione in atti di convegno::04b Atto di convegno in volume
Convenience of running-gear health monitoring systems to reduce unavailability in metropolitan railways / Licciardello, R.; Sapienza, A.; Garcia-Loygorri, J. M.; Jarillo, J. M.; Alvarez-Monteserin, J. A. C.. - 200:(2020), pp. 25-34. (Intervento presentato al convegno Urban Transport XXVI tenutosi a online (COVID-19 pandemic)) [10.2495/UT200031].
File allegati a questo prodotto
File Dimensione Formato  
Licciardello_Convenience-running-gear_2020.pdf

accesso aperto

Note: Contributo
Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Creative commons
Dimensione 578.7 kB
Formato Adobe PDF
578.7 kB Adobe PDF

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1731999
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? ND
social impact