Residential housing is increasingly oriented toward all-electric consumption, also replacing gas loads. Users are under contract by an electricity provider that sets a power threshold above which the supplied is interrupted, that means it is increasingly difficult to stay below the threshold. The paper proposes an innovative device, called PowerAlert, that could show real-time power consumption with an audible signal related to the power thresholds set by the user. It is possible to switch the display between power consumption and the real-time clock with a simple push button.During device configuration is possible to connect it to a wireless network, to set a power meter among those available and its IP address. It is also possible to set three power thresholds referred to three different frequencies of the buzzer as alarm. This device can also be useful for monitoring modern electric devices that work in pulse mode and thermally stress protections that might intervene later.

A prototype of smart clock and load consumption buzzer: PowerAlert / Galasso, Alessandro; Flamini, Alessandro; Loggia, Riccardo; Massaccesi, Andrea; Martirano, Luigi. - (2024), pp. 1-6. (Intervento presentato al convegno 2024 IEEE/IAS 60th Industrial and Commercial Power Systems Technical Conference (I&CPS) DOI: 10.1109/ICPS60943.2024 19-23 May 2024 tenutosi a Las Vegas, Nevada) [10.1109/icps60943.2024.10563838].

A prototype of smart clock and load consumption buzzer: PowerAlert

Galasso, Alessandro;Flamini, Alessandro;Loggia, Riccardo;Massaccesi, Andrea;Martirano, Luigi
2024

Abstract

Residential housing is increasingly oriented toward all-electric consumption, also replacing gas loads. Users are under contract by an electricity provider that sets a power threshold above which the supplied is interrupted, that means it is increasingly difficult to stay below the threshold. The paper proposes an innovative device, called PowerAlert, that could show real-time power consumption with an audible signal related to the power thresholds set by the user. It is possible to switch the display between power consumption and the real-time clock with a simple push button.During device configuration is possible to connect it to a wireless network, to set a power meter among those available and its IP address. It is also possible to set three power thresholds referred to three different frequencies of the buzzer as alarm. This device can also be useful for monitoring modern electric devices that work in pulse mode and thermally stress protections that might intervene later.
2024
2024 IEEE/IAS 60th Industrial and Commercial Power Systems Technical Conference (I&CPS) DOI: 10.1109/ICPS60943.2024 19-23 May 2024
Power meter display, load consumption, load profile, smart device, clock, buzzer
04 Pubblicazione in atti di convegno::04b Atto di convegno in volume
A prototype of smart clock and load consumption buzzer: PowerAlert / Galasso, Alessandro; Flamini, Alessandro; Loggia, Riccardo; Massaccesi, Andrea; Martirano, Luigi. - (2024), pp. 1-6. (Intervento presentato al convegno 2024 IEEE/IAS 60th Industrial and Commercial Power Systems Technical Conference (I&CPS) DOI: 10.1109/ICPS60943.2024 19-23 May 2024 tenutosi a Las Vegas, Nevada) [10.1109/icps60943.2024.10563838].
File allegati a questo prodotto
File Dimensione Formato  
Galasso_A Prototype of Smart_2024.pdf

solo gestori archivio

Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 1.74 MB
Formato Adobe PDF
1.74 MB Adobe PDF   Contatta l'autore

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1721234
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? ND
social impact