Cigarette butts, one of the most common forms of litter in the world, represent a source of chemical and plastic pollution releasing thousands of toxic compounds and microfibers of cellulose acetate (CA). Besides the correct waste management, the recovery of CA from cigarette filters is a way to cushion their negative effects on the environment. Thus far, recycling strategies have been limited to industrial applications, while not many solutions have designed for water remediation. This work describes a strategy to valorize this harmful waste and to reverse its environmental impact, proposing a simple and effective procedure of reclamation of CA and its reuse to prepare a composite sorbent for the treatment of polluted water. The first step entails the washing of filters with hot water (T = 90 °C) and hot ethanol (T = 58–68 °C) to remove the impurities produced during cigarette burning, as verified by means of UV and attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectroscopy, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The second step involves the use of the regenerated CA to prepare porous cylinder-shaped cryogels (15 mm × 10 mm) whose sorption properties are enhanced by the combination with AC (15 % w/w). The synthesis takes advantage of the sol-gel transition of the polymer dispersion (5 % w/V) in a solution acetone/water 5 mM in NH3 (60/40, v/v). After characterization by dynamic mechanical analysis (DMA), TGA, FT-IR, and scanning electron microscopy (SEM), the adsorption capability of the physical cryogel was studied in terms of treated environmental water volume, contact time and concentration of the selected pollutants. The results have shown that the proposed strategy is a low-cost way to recycle CA from cigarette butts and that the designed sorbent is a promising material for water treatment, allowing quick removal times and yields >79.6 %.

Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation / De Cesaris, Massimo Giuseppe; Felli, Nina; Antonelli, Lorenzo; Francolini, Iolanda; D'Orazio, Giovanni; Dal Bosco, Chiara; Gentili, Alessandra. - In: SCIENCE OF THE TOTAL ENVIRONMENT. - ISSN 0048-9697. - 929:(2024), pp. 1-11. [10.1016/j.scitotenv.2024.172677]

Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation

De Cesaris, Massimo Giuseppe
Primo
;
Felli, Nina;Antonelli, Lorenzo;Francolini, Iolanda;Dal Bosco, Chiara;Gentili, Alessandra
2024

Abstract

Cigarette butts, one of the most common forms of litter in the world, represent a source of chemical and plastic pollution releasing thousands of toxic compounds and microfibers of cellulose acetate (CA). Besides the correct waste management, the recovery of CA from cigarette filters is a way to cushion their negative effects on the environment. Thus far, recycling strategies have been limited to industrial applications, while not many solutions have designed for water remediation. This work describes a strategy to valorize this harmful waste and to reverse its environmental impact, proposing a simple and effective procedure of reclamation of CA and its reuse to prepare a composite sorbent for the treatment of polluted water. The first step entails the washing of filters with hot water (T = 90 °C) and hot ethanol (T = 58–68 °C) to remove the impurities produced during cigarette burning, as verified by means of UV and attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectroscopy, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The second step involves the use of the regenerated CA to prepare porous cylinder-shaped cryogels (15 mm × 10 mm) whose sorption properties are enhanced by the combination with AC (15 % w/w). The synthesis takes advantage of the sol-gel transition of the polymer dispersion (5 % w/V) in a solution acetone/water 5 mM in NH3 (60/40, v/v). After characterization by dynamic mechanical analysis (DMA), TGA, FT-IR, and scanning electron microscopy (SEM), the adsorption capability of the physical cryogel was studied in terms of treated environmental water volume, contact time and concentration of the selected pollutants. The results have shown that the proposed strategy is a low-cost way to recycle CA from cigarette butts and that the designed sorbent is a promising material for water treatment, allowing quick removal times and yields >79.6 %.
2024
bioplastic; recycled cellulose acetate; composite sorbents; organic contaminants; water treatment; sustainable chemistry
01 Pubblicazione su rivista::01a Articolo in rivista
Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation / De Cesaris, Massimo Giuseppe; Felli, Nina; Antonelli, Lorenzo; Francolini, Iolanda; D'Orazio, Giovanni; Dal Bosco, Chiara; Gentili, Alessandra. - In: SCIENCE OF THE TOTAL ENVIRONMENT. - ISSN 0048-9697. - 929:(2024), pp. 1-11. [10.1016/j.scitotenv.2024.172677]
File allegati a questo prodotto
File Dimensione Formato  
DeCesaris_Recovery_2024.pdf

accesso aperto

Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Creative commons
Dimensione 5.85 MB
Formato Adobe PDF
5.85 MB Adobe PDF

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1712159
Citazioni
  • ???jsp.display-item.citation.pmc??? 0
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact