Correlation of tensile properties of Arc-Sprayed coatings and easy testing methods

Different techniques are usually employed to evaluate the mechanical properties of arc-sprayed coatings. In many situations, comparing properties is complex, and values extracted from tensile tests are required for structural projects. X6CrNi18-8 stainless steel and molybdenum were sprayed onto a mild steel substrate using the electric arc thermal spray technique to discuss this issue. After a detailed microstructure characterization, tensile tests were performed on both coatings to determine the yield strength and total elongation. Easy techniques were also applied: Vickers hardness and Charpy impact test. Tensile tests have shown that applying coatings increased the steel substrate’s total elongation. Molybdenum coating presented a higher impact resistance than the X6CrNi18-8 one, resulting in no correlation between elongation and Charpy values. On the other hand, correlations between hardness and yield strength were identified, opening a discussion on the effects of the microstructure and type of test used.