Influence of spatially heterogeneous deterioration patterns on strength and ductility of corroded reinforced concrete bridge piers

This work reports on some preliminary results obtained within the framework of a wide research project aimed to study the influence of the corrosion of in Reinforced Concrete (RC) piers on the overall seismic performances of bridges. In this context, after the statistical evaluation of a large database of real structures, a consistent set of bridges and piers has been selected as a sample representative of typical bridge profiles, pier heights and cross-sections as well as of material properties. In the first part of the project, pushover analyses of isolated piers with different corrosion patterns and intensity are carried out to evaluate the residual strength and ductility of corroded piers. In the second part, nonlinear static and dynamic seismic analyses of bridges with corroded piers are carried out to evaluate the influence of the deterioration on the overall seismic performance. Due to specific environmental conditions exposure or to water percolation from the superstructures, it is often the case that corrosion is non-uniformly distributed over piers producing non-homogeneous spatial deterioration patterns. The nonlinear modeling of this type of situations represents specific challenges related to the description of the deterioration patterns and the calibration of material properties. To this end, a multi-level modeling approach based on fiber-based finite elements has been developed and implemented in a specific OpenSeesPy software that allows users to accurately model RC piers subject to arbitrary corrosion patterns, up to their ultimate limit states. In this work, a specific case study of a typical RC rectangular hollow bridge extracted from the mentioned above database subject to different corrosion intensity and patterns is studied. In particular, the influence of the corrosion-induced deterioration on residual strength and ductility are studied. Results show that depending on the intensity and on the patterns significant variations of both strength and ductility can be observed with respect to the undamaged conditions.