Innovative treatment and utilization of waste biomass streams are crucial for increase environmental sustainability of human activities. Sewage sludge from the biological degradation of biomass can be valorized for the selection of biocatalysts capable to convert CO2 into valuable products. Indeed, chemoautotrophic microorganisms, like methanogens and acetogens, respectively, are able to convert CO2 into CH4 or acetate by using hydrogen as electron donor, i.e., their utilization for several bio-based CO2 reutilization processes has been widely proposed by several authors. Chemoautothrophic acetogens are widely present in waste streams deriving from the organic matter degradation, however, due to the syntrophic relationship between acetogens and acetoclastic methanogens in anaerobic environments, autothropihc acetate results immediately converted into methane. Therefore, the selection of an acetogenic inoculum which allow to obtain CO2 reduction into acetate, requires methanogens inhibition. Among the different methanogen’s inhibition strategies, the most common method is the use of BES (bromo-ethane sulphonate) which results a not scalable technique for large scale application. A most promising and sustainable approach is offered by the adoption of a thermal treatment which allows to the selection of an acetogenic inoculum, thanks ot the sporogenous capacity of acetogenic bacteria. This work presents the results obtained in the thermal pre-treatment of different type of waste biomasses coming from pilot and full-scale biological processes for the selection of an acetogenic inoculum able to convert CO2 into acetate. Each waste biomass was treated by a thermal shock procedure that consisted in the treatment of the dried biomass at 120°C for 2 hours. Acetogenic inoculums obtained by the thermal pre-treatment of an acidogenic fermentate, an activated sludge and a mesophilic anaerobic digestate, were tested under hydrogenophilic conditions in comparison with blank tests and raw inoculums. The results clearly indicate the effectiveness of the thermal pre-treatment in the selection of the acetogenic microorga

Acetogenic inoculum selection for acetate production from waste biomasses via thermal shock treatment / Zeppilli, M.; Cristiani, L.; Ferretti, J.; Majone, M.; Villano, M.. - In: CHEMICAL ENGINEERING TRANSACTIONS. - ISSN 2283-9216. - 92:(2022), pp. 13-18. [10.3303/CET2292003]

Acetogenic inoculum selection for acetate production from waste biomasses via thermal shock treatment

Zeppilli M.
;
Cristiani L.;Ferretti J.;Majone M.;Villano M.
2022

Abstract

Innovative treatment and utilization of waste biomass streams are crucial for increase environmental sustainability of human activities. Sewage sludge from the biological degradation of biomass can be valorized for the selection of biocatalysts capable to convert CO2 into valuable products. Indeed, chemoautotrophic microorganisms, like methanogens and acetogens, respectively, are able to convert CO2 into CH4 or acetate by using hydrogen as electron donor, i.e., their utilization for several bio-based CO2 reutilization processes has been widely proposed by several authors. Chemoautothrophic acetogens are widely present in waste streams deriving from the organic matter degradation, however, due to the syntrophic relationship between acetogens and acetoclastic methanogens in anaerobic environments, autothropihc acetate results immediately converted into methane. Therefore, the selection of an acetogenic inoculum which allow to obtain CO2 reduction into acetate, requires methanogens inhibition. Among the different methanogen’s inhibition strategies, the most common method is the use of BES (bromo-ethane sulphonate) which results a not scalable technique for large scale application. A most promising and sustainable approach is offered by the adoption of a thermal treatment which allows to the selection of an acetogenic inoculum, thanks ot the sporogenous capacity of acetogenic bacteria. This work presents the results obtained in the thermal pre-treatment of different type of waste biomasses coming from pilot and full-scale biological processes for the selection of an acetogenic inoculum able to convert CO2 into acetate. Each waste biomass was treated by a thermal shock procedure that consisted in the treatment of the dried biomass at 120°C for 2 hours. Acetogenic inoculums obtained by the thermal pre-treatment of an acidogenic fermentate, an activated sludge and a mesophilic anaerobic digestate, were tested under hydrogenophilic conditions in comparison with blank tests and raw inoculums. The results clearly indicate the effectiveness of the thermal pre-treatment in the selection of the acetogenic microorga
2022
acetate production; CO2 fixation; acetogenic inoculum
01 Pubblicazione su rivista::01a Articolo in rivista
Acetogenic inoculum selection for acetate production from waste biomasses via thermal shock treatment / Zeppilli, M.; Cristiani, L.; Ferretti, J.; Majone, M.; Villano, M.. - In: CHEMICAL ENGINEERING TRANSACTIONS. - ISSN 2283-9216. - 92:(2022), pp. 13-18. [10.3303/CET2292003]
File allegati a questo prodotto
File Dimensione Formato  
Zeppilli_Acetogenic-inoculum_2022.pdf

accesso aperto

Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Creative commons
Dimensione 931.69 kB
Formato Adobe PDF
931.69 kB Adobe PDF

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1666124
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? ND
social impact