A New readout electronic for kinetic inductance detectors

With this contribution we show the readout electronics for kinetic inductance detectors (KIDs) that we are developing based on commercial IQ transceivers from National Instruments and using a Virtex 5 class FPGA. It will be the readout electronics of the COSmic Monopole Observer (COSMO) experiment, a ground based cryogenic Martin–Puplett Interferometer searching for the cosmic microwave background spectral distortions. The readout electronics require a sampling rate in the range of tens of kHz, which is both due to a fast rotating mirror modulating the signal and the time constant of the COSMO KIDs. In this contribution we show the capabilities of our readout electronics using Niobium KIDs developed by Paris Observatory for our 5 K cryogenic system. In particular, we demonstrate the capability to detect 23 resonators from frequency sweeps and to readout the state of each resonator with a sampling rate of about 8 kHz. The readout is based on a finite-state machine where the first two states look for the resonances and generate the comb of tones, while the third one performs the acquisition of phase and amplitude of each detector in free running. Our electronics are based on commercial modules, which brings two key advantages: they can be acquired easily and it is relative simple to write and modify the firmware within the LabView environment in order to meet the needs of the experiment.