3D re-entrant mechanical metamaterials were designed and fabricated with PμLSE (Projection Micro Litho Stereo Exposure) 3D printing technique, synchrotron X-Ray tomography 3D imaging and in situ mechanical experiments were performed for characterizing additive manufacturing (AM) process induced internal defects, corresponding relations between defects and mechanical behaviors of harvested 3D re-entrant lattice samples were explored through experiments and simulations comparisons. Firstly, in situ micro compression mechanical test device was designed and constructed for in situ synchrotron X-Ray 3D tomography mechanical experiments; Afterwards, interrupted in situ compression tests were performed for investigating the effects of manufacturing process induced defects on the deformation behaviors of 3D re-entrant lattice metamaterials, and finite element (FE) modeling was performed and compared with experimental results for understanding the mechanical behaviors of as-fabricated 3D re-entrant lattice metamaterials. © 2020 The Authors
Synchrotron X-ray micro-computed tomography imaging of 3D re-entrant micro lattice during in situ micro compression experimental process / Wu, W.; Qi, D.; Hu, W.; Xi, L.; Sun, L.; Liao, B.; Berto, Filippo; Qian, G.; Xiao, D.. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - 192:(2020). [10.1016/j.matdes.2020.108743]
Synchrotron X-ray micro-computed tomography imaging of 3D re-entrant micro lattice during in situ micro compression experimental process
Wu W.;Qi D.;Sun L.;Berto Filippo;
2020
Abstract
3D re-entrant mechanical metamaterials were designed and fabricated with PμLSE (Projection Micro Litho Stereo Exposure) 3D printing technique, synchrotron X-Ray tomography 3D imaging and in situ mechanical experiments were performed for characterizing additive manufacturing (AM) process induced internal defects, corresponding relations between defects and mechanical behaviors of harvested 3D re-entrant lattice samples were explored through experiments and simulations comparisons. Firstly, in situ micro compression mechanical test device was designed and constructed for in situ synchrotron X-Ray 3D tomography mechanical experiments; Afterwards, interrupted in situ compression tests were performed for investigating the effects of manufacturing process induced defects on the deformation behaviors of 3D re-entrant lattice metamaterials, and finite element (FE) modeling was performed and compared with experimental results for understanding the mechanical behaviors of as-fabricated 3D re-entrant lattice metamaterials. © 2020 The AuthorsFile | Dimensione | Formato | |
---|---|---|---|
Wu_Synchrotron-X-ray-micro_2020.pdf
accesso aperto
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Creative commons
Dimensione
3.82 MB
Formato
Adobe PDF
|
3.82 MB | Adobe PDF |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.