The fatigue behaviour of notched and unnotched specimens produced by additively manufactured Inconel 718 were analysed in the as-built and heat-treated conditions. The surfaces display high roughness and defects acting as fatigue initiation sites. In the as-built condition, fine subgrains were found, while in in the heat-treated state, the subgrains were removed and the dislocation density recovered. SN-curves are predicted based on tensile properties, hardness and defects obtained by fractography, using the (Formula presented.) -method. © 2020 The Authors. Fatigue & Fracture of Engineering Materials & Structures published by John Wiley & Sons Ltd

Fatigue assessment of as-built and heat-treated Inconel 718 specimens produced by additive manufacturing including notch effects / Solberg, K.; Wan, D.; Berto, Filippo. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - 43:10(2020), pp. 2326-2336. [10.1111/ffe.13300]

Fatigue assessment of as-built and heat-treated Inconel 718 specimens produced by additive manufacturing including notch effects

Berto Filippo
2020

Abstract

The fatigue behaviour of notched and unnotched specimens produced by additively manufactured Inconel 718 were analysed in the as-built and heat-treated conditions. The surfaces display high roughness and defects acting as fatigue initiation sites. In the as-built condition, fine subgrains were found, while in in the heat-treated state, the subgrains were removed and the dislocation density recovered. SN-curves are predicted based on tensile properties, hardness and defects obtained by fractography, using the (Formula presented.) -method. © 2020 The Authors. Fatigue & Fracture of Engineering Materials & Structures published by John Wiley & Sons Ltd
2020
3D printers; additives; defects; fracture mechanics; dislocation densities; fatigue assessments; fatigue behaviour; fatigue initiation; heat treated condition; inconel-718; S-N curve; subgrains; fatigue of materials; additive materials; fatigue; heat treatment; inconel 718; selective laser melting; small defects
01 Pubblicazione su rivista::01a Articolo in rivista
Fatigue assessment of as-built and heat-treated Inconel 718 specimens produced by additive manufacturing including notch effects / Solberg, K.; Wan, D.; Berto, Filippo. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - 43:10(2020), pp. 2326-2336. [10.1111/ffe.13300]
File allegati a questo prodotto
File Dimensione Formato  
Solberg_fatigue-assessment-built_2020.pdf

solo gestori archivio

Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 16 MB
Formato Adobe PDF
16 MB Adobe PDF   Contatta l'autore

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1654380
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 31
  • ???jsp.display-item.citation.isi??? 29
social impact