Deactivation model study of high temperature H2S wet-desulfurization by using ZnO

High-temperature desulfurization techniques are fundamental for the development of reliable and efficient conversion systems of low-cost fuels and biomass that answer to the nowadays environmental and energy security issues. This is particularly true for biomass gasification coupled to SOFC systems where the sulfur content has to be minimized before being fed to the SOFC. Thus, commercially available zinc oxide has been studied and characterized as a desulfurizing agent in a fixed-bed reactor at high temperatures from 400◦C to 600◦C. The sorbent material was characterized by XRD, BET, SEM, and EDS analyses before and after adsorption. The sorbent’s sorption capacity has been evaluated at different temperatures, as well as the breakthrough curves. Moreover, the kinetic parameters as the initial sorption rate constant k0, the deactivation rate constant kd, and the activation energy have been calculated using the linearized deactivation model. The best performances have been obtained at 550◦C, obtaining a sorption capacity of 5.4 g per 100 g of sorbent and a breakthrough time of 2.7 h. These results can be used to extend ZnO desulfurization techniques to a higher temperature than the ones used today (i.e., 550◦C with respect to 400◦C).