Crystalline silicon-based heterojunction (HJ) solar cells are becoming the best choice for manufacturing companies, because of the low temperature processes useful for very thin silicon wafers and the possibility to easily achieve cells efficiencies higher than 22% on n-type silicon wafers. However, the maximum cell efficiency is still limited by the typical Fill Factor (FF) value of 82%. This issue is due to several factors, some of which are sometimes underestimated, like the base contact. Indeed, a potential mismatch between the work functions of the transparent conductive oxide and the base doped layer can give rise to a small barrier against electrons collection, which is not easy to recognize when the cell FF overcomes 80%. Also a low doping efficiency of the p-type amorphous layer at the emitter side can negatively affect the FF. In this case, even if high efficiency cells are produced, their full potential is still unexploited. Thus, both selective contacts of the cell, even if apparently optimized to achieve very good results, can hide problems that limit the final cell FF and efficiency. In a previous work, an experimental method and a model to individuate hidden barriers at the base contact on n-type crystalline silicon-based HJs have been provided. In this paper, that model is applied to experimental data obtained from the characterization of both commercial and laboratory level HJ solar cells. Moreover, an easy method to recognize the presence of a barrier to the charge transport at the emitter side of the cell is illustrated.

Selective contacts and fill factor limitations in heterojunction solar cells / Serenelli, L.; Martini, L.; Menchini, F.; Izzi, M.; de Cesare, G.; Condorelli, G.; Gerardi, C.; Munoz, D.; Tucci, M.. - In: PROGRESS IN PHOTOVOLTAICS. - ISSN 1062-7995. - (2021), pp. 1-9. [10.1002/pip.3418]

Selective contacts and fill factor limitations in heterojunction solar cells

Martini L.;Menchini F.;de Cesare G.;
2021

Abstract

Crystalline silicon-based heterojunction (HJ) solar cells are becoming the best choice for manufacturing companies, because of the low temperature processes useful for very thin silicon wafers and the possibility to easily achieve cells efficiencies higher than 22% on n-type silicon wafers. However, the maximum cell efficiency is still limited by the typical Fill Factor (FF) value of 82%. This issue is due to several factors, some of which are sometimes underestimated, like the base contact. Indeed, a potential mismatch between the work functions of the transparent conductive oxide and the base doped layer can give rise to a small barrier against electrons collection, which is not easy to recognize when the cell FF overcomes 80%. Also a low doping efficiency of the p-type amorphous layer at the emitter side can negatively affect the FF. In this case, even if high efficiency cells are produced, their full potential is still unexploited. Thus, both selective contacts of the cell, even if apparently optimized to achieve very good results, can hide problems that limit the final cell FF and efficiency. In a previous work, an experimental method and a model to individuate hidden barriers at the base contact on n-type crystalline silicon-based HJs have been provided. In this paper, that model is applied to experimental data obtained from the characterization of both commercial and laboratory level HJ solar cells. Moreover, an easy method to recognize the presence of a barrier to the charge transport at the emitter side of the cell is illustrated.
2021
energy barrier; fill factor; heterojunctions; selective contacts; simulations
01 Pubblicazione su rivista::01a Articolo in rivista
Selective contacts and fill factor limitations in heterojunction solar cells / Serenelli, L.; Martini, L.; Menchini, F.; Izzi, M.; de Cesare, G.; Condorelli, G.; Gerardi, C.; Munoz, D.; Tucci, M.. - In: PROGRESS IN PHOTOVOLTAICS. - ISSN 1062-7995. - (2021), pp. 1-9. [10.1002/pip.3418]
File allegati a questo prodotto
File Dimensione Formato  
Serenelli_Selective-contacts_2021.pdf

accesso aperto

Tipologia: Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza: Creative commons
Dimensione 1.5 MB
Formato Adobe PDF
1.5 MB Adobe PDF

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1550659
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 3
  • ???jsp.display-item.citation.isi??? 3
social impact