Environmental impact of co-combustion of polyethylene wastes in a rice husks fueled plant: evaluation of organic micropollutants and PM emissions

Co-combustion of biomass and plastic waste has emerged as one of the most promising approach at the plastic waste management challenge. This strategy is particularly attractive since it can simultaneously solve the increasing energy demand and reduce the plastic wastes volume. However, since the combustion of both plastic wastes and natural materials is a potential source of organic micropollutants, such as polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and of polycyclic aromatic hydrocarbons (PAHs), beside particulate matter, the environmental sustainability of the waste to energy (WtE) co-combustion strategy has to be assessed. To this end, the emissions of dioxin like (dl)-PCBs, PCDD/Fs and PAHs from a 4-MW thermal power plant fueled with rice husk, partially replaced by end-of-life polyethylene (PE) industrial waste (up to 15% of the thermal power of the plant), were investigated. GC-MS/MS analyses have demonstrated that the co-combustion of PE waste and rice husk presents a profile of environmental sustainability. The concentrations of dl-PCBs, PCDD/Fs and PAHs were extremely low and they have remained almost unaffected by introducing PE in feed. In particular, emissions of PCCD/Fs and dl-PCBs in flue gas were in the range 0.6-1.0 and 0.2-0.6 pg TEQ/Nm3, respectively, while PAHs concentrations ranged from 410 to 825 ng/Nm3. Furthermore, the emission factors of these organic pollutants were found to be lower with PE increasing rate while particulate matter emissions were not affected by co-combustions. Collectively, the investigation has demonstrated that the noils of the industrial PE, due to the low content in halides and metals, can be used as auxiliary fuel and energetically recycled through co-combustion with rice husk. This case of study represents an effective application of the WtE strategy and a concrete approach to mitigate the threat of plastic pollution.