We report a new Li–S cell concept based on an optimized F-free catholyte solution and a high loading nanostructured C/S composite cathode. The Li2S8 present in the electrolyte ensures both buffering against active material dissolution and Li+ conduction. The high S loading is obtained by confining elemental S (≈80 %) in the pores of a highly ordered mesopores carbon (CMK3). With this concept we demonstrate stabilization of a high energy density and excellent cycling performance over 500 cycles. This Li–S cell has a specific capacity that reaches over 1000 mA h g−1, with an overall S loading of 3.6 mg cm−2 and low electrolyte volume (i.e., 10 μL cm−2), resulting in a practical energy density of 365 Wh kg−1. The Li–S system proposed thus meets the requirements for large scale energy storage systems and is expected to be environmentally friendly and have lower cost compared with the commercial Li-ion battery thanks to the removal of both Co and F from the overall formulation. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
Rational design of low cost and high energy lithium batteries through Tailored fluorine-free electrolyte and nanostructured S/C composite / Agostini, Marco; Lim, Du Hyun; Sadd, Matthew; Hwang, Jang-Yeon; Brutti, Sergio; Heo, J. W.; Ahn, Jou Hyeon; Sun, Yang Kook; Matić, Aleksandar. - In: CHEMSUSCHEM. - ISSN 1864-5631. - 11:17(2018), pp. 2981-2986. [10.1002/cssc.201801017]
Rational design of low cost and high energy lithium batteries through Tailored fluorine-free electrolyte and nanostructured S/C composite
Agostini, Marco
;Brutti, Sergio;
2018
Abstract
We report a new Li–S cell concept based on an optimized F-free catholyte solution and a high loading nanostructured C/S composite cathode. The Li2S8 present in the electrolyte ensures both buffering against active material dissolution and Li+ conduction. The high S loading is obtained by confining elemental S (≈80 %) in the pores of a highly ordered mesopores carbon (CMK3). With this concept we demonstrate stabilization of a high energy density and excellent cycling performance over 500 cycles. This Li–S cell has a specific capacity that reaches over 1000 mA h g−1, with an overall S loading of 3.6 mg cm−2 and low electrolyte volume (i.e., 10 μL cm−2), resulting in a practical energy density of 365 Wh kg−1. The Li–S system proposed thus meets the requirements for large scale energy storage systems and is expected to be environmentally friendly and have lower cost compared with the commercial Li-ion battery thanks to the removal of both Co and F from the overall formulation. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, WeinheimFile | Dimensione | Formato | |
---|---|---|---|
Agostini_et_al-2018-ChemSusChem.pdf
solo gestori archivio
Note: https://onlinelibrary.wiley.com/doi/epdf/10.1002/cssc.201801017
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
1.27 MB
Formato
Adobe PDF
|
1.27 MB | Adobe PDF | Contatta l'autore |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.