Sheet forming of tailor welded blanks (TWBs) of advanced high strength steels is complex because of the notable differences in mechanical properties, and hence in formability, of base metals, heat affected zones and weld seam. In this work, an accurate characterization of the mechanical behavior of these regions in TWBs made of a DP and TRIP steel was carried out. Micro-samples, machined from base metals and fusion zone were employed to retrieve the local constitutive laws up to fracture. At the same time, macro-samples, extracted throughout the welded joint were tested to assess the weldment overall behavior. Along with global load-displacement data, strain and displacement fields of the joint were evaluated, using a Digital Image Correlation technique. An FE simulation of the entire joint was setup, using the previously identified material properties. In a comparison between the FE model and experiments, good results were obtained both at a global and local level, up to fracture

Global-local characterization and numerical modeling of TWB laser welded joints / Nalli, F; Spena, P. R.; Cortese, L; Reiterer, D. - ELETTRONICO. - 2:(2017). (Intervento presentato al convegno International Mechanical Engineering Congress and Exposition, IMECE 2017 tenutosi a Tampa, Florida nel 3-9 November 2017) [10.1115/IMECE2017-71506].

Global-local characterization and numerical modeling of TWB laser welded joints

Cortese L;
2017

Abstract

Sheet forming of tailor welded blanks (TWBs) of advanced high strength steels is complex because of the notable differences in mechanical properties, and hence in formability, of base metals, heat affected zones and weld seam. In this work, an accurate characterization of the mechanical behavior of these regions in TWBs made of a DP and TRIP steel was carried out. Micro-samples, machined from base metals and fusion zone were employed to retrieve the local constitutive laws up to fracture. At the same time, macro-samples, extracted throughout the welded joint were tested to assess the weldment overall behavior. Along with global load-displacement data, strain and displacement fields of the joint were evaluated, using a Digital Image Correlation technique. An FE simulation of the entire joint was setup, using the previously identified material properties. In a comparison between the FE model and experiments, good results were obtained both at a global and local level, up to fracture
2017
International Mechanical Engineering Congress and Exposition, IMECE 2017
Finite element method Formability Fracture Heat affected zone Welding Welds
04 Pubblicazione in atti di convegno::04b Atto di convegno in volume
Global-local characterization and numerical modeling of TWB laser welded joints / Nalli, F; Spena, P. R.; Cortese, L; Reiterer, D. - ELETTRONICO. - 2:(2017). (Intervento presentato al convegno International Mechanical Engineering Congress and Exposition, IMECE 2017 tenutosi a Tampa, Florida nel 3-9 November 2017) [10.1115/IMECE2017-71506].
File allegati a questo prodotto
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/1090521
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? 0
social impact