This paper presents the evaluation of the loss-of-support conditions in frictional beam-to-column connections of industrial precast concrete buildings under seismic actions. This type of connection is widespread throughout Southern Europe in non-seismically designed industrial precast buildings. First, geometric properties of industrial precast buildings and of the frictional beam-to-column connections, together with reference values for the friction coefficient, are reviewed. Then, earthquake time histories taken from the European Strong-Motion sets and recordings of the two major shocks of the 2012 Emilia-Romagna events are presented and discussed showing the importance of the vertical component. Two dynamic models of increasing complexity are used to ascertain loss-of support conditions under seismic action. The first model is an elastic one, representing a single frame of the industrial buildings. Results are obtained according to: (1) 2D analyses, disregarding the time correlation between the response peaks along the horizontal and vertical directions, (2) 2D analyses taking into account time correlation, and (3) 3D analyses to evaluate also directionality effects. The second model is a 2D non-linear planar frame developed within the OpenSees framework. Results show that simplified (linear) models are a good proxy to more refined (non-linear) ones. However, one must resort to non-linear models if differential displacements between beam and column are of interest. The non-linear numerical investigations show that friction coefficient, horizontal and vertical periods and damping, and column reinforcement ratio are the key variables in estimating the loss-of-support conditions
Precast industrial buildings in Southern Europe: Loss of support at frictional beam-to-column connections under seismic actions / Demartino, Cristoforo; Vanzi, Ivo; Monti, Giorgio; Sulpizio, Concetta. - In: BULLETIN OF EARTHQUAKE ENGINEERING. - ISSN 1570-761X. - STAMPA. - 16:1(2018), pp. 259-294. [10.1007/s10518-017-0196-5]
Precast industrial buildings in Southern Europe: Loss of support at frictional beam-to-column connections under seismic actions
Monti, Giorgio;
2018
Abstract
This paper presents the evaluation of the loss-of-support conditions in frictional beam-to-column connections of industrial precast concrete buildings under seismic actions. This type of connection is widespread throughout Southern Europe in non-seismically designed industrial precast buildings. First, geometric properties of industrial precast buildings and of the frictional beam-to-column connections, together with reference values for the friction coefficient, are reviewed. Then, earthquake time histories taken from the European Strong-Motion sets and recordings of the two major shocks of the 2012 Emilia-Romagna events are presented and discussed showing the importance of the vertical component. Two dynamic models of increasing complexity are used to ascertain loss-of support conditions under seismic action. The first model is an elastic one, representing a single frame of the industrial buildings. Results are obtained according to: (1) 2D analyses, disregarding the time correlation between the response peaks along the horizontal and vertical directions, (2) 2D analyses taking into account time correlation, and (3) 3D analyses to evaluate also directionality effects. The second model is a 2D non-linear planar frame developed within the OpenSees framework. Results show that simplified (linear) models are a good proxy to more refined (non-linear) ones. However, one must resort to non-linear models if differential displacements between beam and column are of interest. The non-linear numerical investigations show that friction coefficient, horizontal and vertical periods and damping, and column reinforcement ratio are the key variables in estimating the loss-of-support conditionsFile | Dimensione | Formato | |
---|---|---|---|
Demartino_Precast_2018.pdf
solo gestori archivio
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
2.39 MB
Formato
Adobe PDF
|
2.39 MB | Adobe PDF | Contatta l'autore |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.