The study of the factors that determine the micro-climatic conditions in urban areas, related to the definition of specific design strategies, new materials and new products be used to create surfaces The issue of recovery and urban regeneration takes on different connotations and increasing levels The option of geothermal technology to the satisfaction of regulatory requirements relating to energy production from renewable sources to the energy requirements of buildings, currently constitutes an important opportunity to design and technical implementation approach, including the lens, sometimes desired by architects and builders, to release the architectural design of the building by the presence of plant systems that, also if integrated, go to interfere with the architectural layout of the buildings by placing precise architectural and construction constraints. The geothermal option, however, presents different technological aspects, as well as different are the possible configurations of geothermal systems, configurations that require precise purposes of comparison and evaluation methods to be able to select the one most suitable with respect to the cases in question. The different technical realization of geothermal systems can be divided into 4 types possibilities: - Geothermal systems in thermal exchange, with the ground or with mirrors of water, and closed circuit, related to heat pumps (is the case, for example, the plant in the settlement service "Renaissance III" made from ' company "Impreme spa" in Rome); - Geothermal systems that use ground water, open circuit, related to heat pumps (for example the case of the Egyptian Museum of Turin); - Geothermal systems in direct heat exchange and to open circuit (for example the case of the Ferrara district heating system); - Geothermal systems that use the endogenous heat (as in the case of plants of Larderello in Tuscany) The most appropriate technology option choice than to specific projects and contexts in question, it should be examined through a comparative comparison, performance, structural and economic terms, between the different technical possibilities of realization of the outlined geothermal systems.

L’opzione della tecnologia geotermica per il soddisfacimento delle richieste normative relative alla produzione energetica da fonte rinnovabile per il fabbisogno energetico degli edifici, costituisce attualmente una importante possibilità di approccio progettuale e tecnico-attuativo, anche nell’obiettivo, a volte auspicato da architetti e costruttori, di svincolare la progettazione architettonica dell’edificio dalla presenza di sistemi impiantistici che, anche se integrati, vanno ad interferire con l’assetto architettonico degli edifici ponendo precisi vincoli architettonici e costruttivi. L’opzione geotermica presenta tuttavia aspetti tecnologici differenti, così come differenti sono le possibili configurazioni dei sistemi geotermici, configurazioni che necessitano di precise metodiche di comparazione e valutazione ai fini di poter selezionare quella maggiormente idonea rispetto ai casi in oggetto. Le differenti possibilità tecnico-realizzative dei sistemi geotermici possono essere suddivise in 4 tipologie: - Sistemi geotermici a scambio termico, con il terreno o con specchi d’acqua, ed a circuito chiuso, correlati a pompe di calore (è il caso, ad esempio, dell’impianto a servizio dell’insediamento “Rinascimento III” realizzato dall’azienda “Impreme spa” a Roma); - Sistemi geotermici che utilizzano acqua di falda, a circuito aperto, correlati a pompe di calore (ad esempio il caso del Museo Egizio di Torino); - Sistemi geotermici a scambio termico diretto ed a circuito aperto (ad esempio il caso del sistema di teleriscaldamento di Ferrara); - Sistemi geotermici che utilizzano il calore endogeno (come nel caso degli impianti di Larderello in Toscana) La scelta dell’opzione tecnologica maggiormente adeguata rispetto alle specificità dei progetti e dei contesti in oggetto, va vagliata attraverso un confronto comparativo, in termini prestazionali, costruttivi ed economici, tra le differenti possibilità tecnico-realizzative dei sistemi geotermici delineate.

GEOTERMIA “RISORSA DELLA TERRA” PER LA SFIDA DEI CAMBIAMENTI CLIMATICI : “Innovazione tecnologica e sperimentazioni / D'Olimpio, Domenico. - ELETTRONICO. - (2016). (Intervento presentato al convegno GEOTERMIA “RISORSA DELLA TERRA” PER LA SFIDA DEI CAMBIAMENTI CLIMATICI tenutosi a Roma).

GEOTERMIA “RISORSA DELLA TERRA” PER LA SFIDA DEI CAMBIAMENTI CLIMATICI : “Innovazione tecnologica e sperimentazioni

D'OLIMPIO, Domenico
2016

Abstract

The study of the factors that determine the micro-climatic conditions in urban areas, related to the definition of specific design strategies, new materials and new products be used to create surfaces The issue of recovery and urban regeneration takes on different connotations and increasing levels The option of geothermal technology to the satisfaction of regulatory requirements relating to energy production from renewable sources to the energy requirements of buildings, currently constitutes an important opportunity to design and technical implementation approach, including the lens, sometimes desired by architects and builders, to release the architectural design of the building by the presence of plant systems that, also if integrated, go to interfere with the architectural layout of the buildings by placing precise architectural and construction constraints. The geothermal option, however, presents different technological aspects, as well as different are the possible configurations of geothermal systems, configurations that require precise purposes of comparison and evaluation methods to be able to select the one most suitable with respect to the cases in question. The different technical realization of geothermal systems can be divided into 4 types possibilities: - Geothermal systems in thermal exchange, with the ground or with mirrors of water, and closed circuit, related to heat pumps (is the case, for example, the plant in the settlement service "Renaissance III" made from ' company "Impreme spa" in Rome); - Geothermal systems that use ground water, open circuit, related to heat pumps (for example the case of the Egyptian Museum of Turin); - Geothermal systems in direct heat exchange and to open circuit (for example the case of the Ferrara district heating system); - Geothermal systems that use the endogenous heat (as in the case of plants of Larderello in Tuscany) The most appropriate technology option choice than to specific projects and contexts in question, it should be examined through a comparative comparison, performance, structural and economic terms, between the different technical possibilities of realization of the outlined geothermal systems.
2016
L’opzione della tecnologia geotermica per il soddisfacimento delle richieste normative relative alla produzione energetica da fonte rinnovabile per il fabbisogno energetico degli edifici, costituisce attualmente una importante possibilità di approccio progettuale e tecnico-attuativo, anche nell’obiettivo, a volte auspicato da architetti e costruttori, di svincolare la progettazione architettonica dell’edificio dalla presenza di sistemi impiantistici che, anche se integrati, vanno ad interferire con l’assetto architettonico degli edifici ponendo precisi vincoli architettonici e costruttivi. L’opzione geotermica presenta tuttavia aspetti tecnologici differenti, così come differenti sono le possibili configurazioni dei sistemi geotermici, configurazioni che necessitano di precise metodiche di comparazione e valutazione ai fini di poter selezionare quella maggiormente idonea rispetto ai casi in oggetto. Le differenti possibilità tecnico-realizzative dei sistemi geotermici possono essere suddivise in 4 tipologie: - Sistemi geotermici a scambio termico, con il terreno o con specchi d’acqua, ed a circuito chiuso, correlati a pompe di calore (è il caso, ad esempio, dell’impianto a servizio dell’insediamento “Rinascimento III” realizzato dall’azienda “Impreme spa” a Roma); - Sistemi geotermici che utilizzano acqua di falda, a circuito aperto, correlati a pompe di calore (ad esempio il caso del Museo Egizio di Torino); - Sistemi geotermici a scambio termico diretto ed a circuito aperto (ad esempio il caso del sistema di teleriscaldamento di Ferrara); - Sistemi geotermici che utilizzano il calore endogeno (come nel caso degli impianti di Larderello in Toscana) La scelta dell’opzione tecnologica maggiormente adeguata rispetto alle specificità dei progetti e dei contesti in oggetto, va vagliata attraverso un confronto comparativo, in termini prestazionali, costruttivi ed economici, tra le differenti possibilità tecnico-realizzative dei sistemi geotermici delineate.
File allegati a questo prodotto
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/913256
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact