Solvent-free nanocomposite proton-conducting membranes composed of cesium salt of phosphotungstic acid doped PVDF-CTFE/PEO blend

In this research, novel nanocomposite membranes were prepared using polymer blend of polyethylene oxide (PEO) and polyvinylidene fluoride-chloro tetrafluoro ethylene (PVDF-CTFE) copolymer with cesium salt of phosphotungstic acid (Cs2.5H0.5PWO40) as proton conductor. Nanocomposite membranes were prepared by solvent-free procedure. The DSC studies show a decrease in crystalinity of polymer matrix with increasing PEO to PVDF-CTFE proportional ratio and the filler. The TGA studies show that membranes are stable up to 180 °C. The TGA also indicates that addition of cesium salt of phosphotungstic acid increases the thermal stability of membranes. The SEMs exhibit that membranes are non-porous and the additive components are homogenously dispersed. Conductivity tests for membranes were carried out in the range of 25-100 °C in dry and hydrated states. Results show that by increasing the temperature, membranes conductivities are increased. In dry state, except at the temperature of 45 °C, membranes which have the highest crystalinity, have the highest conductivity. The alteration of the conductivity in the range of temperatures in dry condition may be attributed to segmental motion of polymer which resulted in proton hopping from one site to another or increasing free volume for proton motion. In fully hydrated state, dynamic equilibrium between different proton moieties determines the mode of proton conductivity which can be described by Grothuss mechanism. In the presence of water molecule, the free proton may be formed. The conductivity for the membrane in hydrated state with the blend ratio of PVDF:PEO = 95:5 w/w and 10% addition of cesium salt of phosphotungstic acid at the temperature of 90 °C is 1.05 × 10-4 S cm-1. © 2010 Springer-Verlag.