Effect of the applied organic load rate on biodegradable polymers production by mixed microbial cultures in a Sequencing Batch Reactor.

This article studies the operation of a new process for the production of biopolymers (polyhydroxyalkanoates, PHAs) at different applied organic load rates (OLRs). The process is based on the aerobic enrichment of activated sludge to obtain mixed cultures able to store PHAs at high rates and yields. A mixture of acetic, lactic, and propionic acids at different concentrations (in the range 8.5-31.25 gCOD/L) was fed every 2 h in a sequencing batch reactor (SBR). The resulting applied OLR was in the range 8.5-31.25 gCOD/L/day. Even though, as expected, the increase in the OLR caused an increase in biomass concentration (up to about 8.7 g COD/L), it also caused a relevant decrease of maximal polymer production rate. This decrease in polymer production rate was related to the different extent of "feast and famine" conditions, as function of the applied OLR and of the start-up conditions. As a consequence the best performance of the process was obtained at an intermediate OLR (20 gCOD/L/day) where both biomass productivity and PHA storage were high enough. However, at this high OLR the process was unstable and sudden decrease of performance was also observed. The sludge characterized by the highest PHA storage response was investigated by 16S rDNA clone library. The clone library contained sequences mostly from PHA producers (e.g., Alcaligenes and Comamonas genera); however many genera and among them, one of the dominant (Thauera), were never described before in relation to PHA storage response.