A new type of hydrogel was prepared, under controlled conditions, by diffusion of Ca(II) ions into a solution of the carboxylated derivative of Scleroglucan (Sclerox). The obtained hydrogel was loaded with Theophylline (TPH) and Myoglobin (MGB), two model drugs of remarkably different steric hindrance, and also used, after freeze drying, for the preparation of tablets. Release studies were carried out on both the freshly prepared gel and on the tablets. As far as the gel systems experiments are concerned, the delivery profiles resulted to be deeply dependent on the molecular dimensions of the loaded molecules; TPH was easily released while the larger tested molecule (MGB) remained partially entrapped within the three-dimensional network. Furthermore, in the case of MGB, the release was dependent also on polymer concentration (c(p)): at the highest investigated cp value a corresponding lowest delivery of the guest molecule was observed. This effect of polymer concentration on the rate of delivery was studied applying three different mathematical approaches: the one that better fitted the experimental release profile allowed to support the explanation of the mechanism involved in the observed two-step delivery that has been related to the drug trapping inside the clusters of the gel network. The delivery profiles from the tablets showed how the release, in this case, could be related, essentially, to the molecular dimensions of the guest molecules, independently on the cp used to prepare the starting hydrogel. TPH was completely delivered in a few hours while the MGB was almost unable to diffuse out of the matrix and more than 80% resulted entrapped in the network for at least 24 h. The novel hydrogel, at different c(p), was also characterized by means of a texture analyzer to inspect its mechanical properties. According to the compression data, the hardness, the work of cohesion and the work of adhesion of the networks were estimated. Furthermore, by means of relaxation experiments, analysed applying the generalized Maxwell model, the gels can be classified as solid viscoelastic materials and the mechanical spectra indicated a predominance of the viscous behaviour, while the Young modulus, E-0, as expected, was found to increase with polymer concentration. (C) 2004 Elsevier B.V. All rights reserved.

A new polysaccharidic gel matrix for drug delivery: preparation and mechanical properties / Coviello, Tommasina; Alhaique, Franco; Chiara, Parisi; Matricardi, Pietro; Gianfranco, Bocchinfuso; Mario, Grassi. - In: JOURNAL OF CONTROLLED RELEASE. - ISSN 0168-3659. - STAMPA. - 102:3(2005), pp. 643-656. [10.1016/j.jconrel.2004.10.028]

A new polysaccharidic gel matrix for drug delivery: preparation and mechanical properties

COVIELLO, Tommasina;ALHAIQUE, Franco;MATRICARDI, PIETRO;
2005

Abstract

A new type of hydrogel was prepared, under controlled conditions, by diffusion of Ca(II) ions into a solution of the carboxylated derivative of Scleroglucan (Sclerox). The obtained hydrogel was loaded with Theophylline (TPH) and Myoglobin (MGB), two model drugs of remarkably different steric hindrance, and also used, after freeze drying, for the preparation of tablets. Release studies were carried out on both the freshly prepared gel and on the tablets. As far as the gel systems experiments are concerned, the delivery profiles resulted to be deeply dependent on the molecular dimensions of the loaded molecules; TPH was easily released while the larger tested molecule (MGB) remained partially entrapped within the three-dimensional network. Furthermore, in the case of MGB, the release was dependent also on polymer concentration (c(p)): at the highest investigated cp value a corresponding lowest delivery of the guest molecule was observed. This effect of polymer concentration on the rate of delivery was studied applying three different mathematical approaches: the one that better fitted the experimental release profile allowed to support the explanation of the mechanism involved in the observed two-step delivery that has been related to the drug trapping inside the clusters of the gel network. The delivery profiles from the tablets showed how the release, in this case, could be related, essentially, to the molecular dimensions of the guest molecules, independently on the cp used to prepare the starting hydrogel. TPH was completely delivered in a few hours while the MGB was almost unable to diffuse out of the matrix and more than 80% resulted entrapped in the network for at least 24 h. The novel hydrogel, at different c(p), was also characterized by means of a texture analyzer to inspect its mechanical properties. According to the compression data, the hardness, the work of cohesion and the work of adhesion of the networks were estimated. Furthermore, by means of relaxation experiments, analysed applying the generalized Maxwell model, the gels can be classified as solid viscoelastic materials and the mechanical spectra indicated a predominance of the viscous behaviour, while the Young modulus, E-0, as expected, was found to increase with polymer concentration. (C) 2004 Elsevier B.V. All rights reserved.
2005
hydrogel; modified release; myoglobin; scleroglucan derivative; texture analyzer; theophylline
01 Pubblicazione su rivista::01a Articolo in rivista
A new polysaccharidic gel matrix for drug delivery: preparation and mechanical properties / Coviello, Tommasina; Alhaique, Franco; Chiara, Parisi; Matricardi, Pietro; Gianfranco, Bocchinfuso; Mario, Grassi. - In: JOURNAL OF CONTROLLED RELEASE. - ISSN 0168-3659. - STAMPA. - 102:3(2005), pp. 643-656. [10.1016/j.jconrel.2004.10.028]
File allegati a questo prodotto
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/235527
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? 7
  • Scopus 55
  • ???jsp.display-item.citation.isi??? 48
social impact