The need to limit the population of artificial debris in near-Earth space motivates the development of efficient deorbiting propulsion systems. Electrodynamic tethers offer a valid and attractive alternative to conventional chemical thrusters because they impose a penalty in terms of deorbiting time rather than additional launch mass. A low-cost demonstration mission is designed, where a reduced-scale deorbiting system will be carried, deployed, and controlled by a microsatellite. Numerical simulations show that the proposed configuration of the electrodynamic system allows, even in absence of active tether current control, to maintain a stable tether attitude motion. This is obtained through a careful combination of bare and insulated tether segments. When active current control is applied, the tether libration angles are bounded to within 10 deg. The closed-loop control laws make use of the in-plane and out-of-plane libration angles and rates, which are estimated through a newly developed extended Kalman filter. The estimator's measurements are provided by two three-axis magnetometers mounted on the spacecraft structure and at the lower tether endpoint, respectively. It is shown that this microsystem is able to deorbit a low-Earth-orbit carrier spacecraft in about two months, demonstrating salient features of tether technologies and associated electrodynamic effects.

Small mission design for testing in-orbit an electrodynamic tether deorbiting system / P., Tortora; L., Somenzi; Iess, Luciano; R., Licata. - In: JOURNAL OF SPACECRAFT AND ROCKETS. - ISSN 0022-4650. - 43:4(2006), pp. 883-892. [10.2514/1.15359]

Small mission design for testing in-orbit an electrodynamic tether deorbiting system

IESS, Luciano;
2006

Abstract

The need to limit the population of artificial debris in near-Earth space motivates the development of efficient deorbiting propulsion systems. Electrodynamic tethers offer a valid and attractive alternative to conventional chemical thrusters because they impose a penalty in terms of deorbiting time rather than additional launch mass. A low-cost demonstration mission is designed, where a reduced-scale deorbiting system will be carried, deployed, and controlled by a microsatellite. Numerical simulations show that the proposed configuration of the electrodynamic system allows, even in absence of active tether current control, to maintain a stable tether attitude motion. This is obtained through a careful combination of bare and insulated tether segments. When active current control is applied, the tether libration angles are bounded to within 10 deg. The closed-loop control laws make use of the in-plane and out-of-plane libration angles and rates, which are estimated through a newly developed extended Kalman filter. The estimator's measurements are provided by two three-axis magnetometers mounted on the spacecraft structure and at the lower tether endpoint, respectively. It is shown that this microsystem is able to deorbit a low-Earth-orbit carrier spacecraft in about two months, demonstrating salient features of tether technologies and associated electrodynamic effects.
2006
01 Pubblicazione su rivista::01a Articolo in rivista
Small mission design for testing in-orbit an electrodynamic tether deorbiting system / P., Tortora; L., Somenzi; Iess, Luciano; R., Licata. - In: JOURNAL OF SPACECRAFT AND ROCKETS. - ISSN 0022-4650. - 43:4(2006), pp. 883-892. [10.2514/1.15359]
File allegati a questo prodotto
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/16647
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 20
  • ???jsp.display-item.citation.isi??? 17
social impact