An investigation in paint stripping of a single-layer epoxy polyester hybrid coating from an aluminium substrate highly suitable for recycling process was reported. The feasibility of a diode laser source without any assistance of oxygen flow was checked and the best operative conditions were sought. Attention was first paid on the deposition of the polymeric film on aluminium substrates so as to perform the paint stripping process on coatings with the closest geometrical tolerances and dimensional accuracy. Then, a full factorial experimental design was led in order to study the influence of main process variables, that is, the interaction time, the power density, the focusing length, the absorption coefficient and the number of passes on the effectiveness of paint stripping expressed in terms of paint removal depth. Finally, several process maps were developed as a support in identifying the best way to lead the paint stripping process. Process characteristics, leading mechanisms and a simple regression linear model, easily applicable to a wide range of paint stripping contexts, were also discussed in detail. (c) 2005 Elsevier B.V. All rights reserved.

Advance in paint stripping from aluminium substrates / M., Barletta; Gisario, Annamaria; V., Tagliaferri. - In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. - ISSN 0924-0136. - ELETTRONICO. - 173:2(2006), pp. 232-239. [10.1016/j.jmatprotec.2005.11.029]

Advance in paint stripping from aluminium substrates

GISARIO, ANNAMARIA;
2006

Abstract

An investigation in paint stripping of a single-layer epoxy polyester hybrid coating from an aluminium substrate highly suitable for recycling process was reported. The feasibility of a diode laser source without any assistance of oxygen flow was checked and the best operative conditions were sought. Attention was first paid on the deposition of the polymeric film on aluminium substrates so as to perform the paint stripping process on coatings with the closest geometrical tolerances and dimensional accuracy. Then, a full factorial experimental design was led in order to study the influence of main process variables, that is, the interaction time, the power density, the focusing length, the absorption coefficient and the number of passes on the effectiveness of paint stripping expressed in terms of paint removal depth. Finally, several process maps were developed as a support in identifying the best way to lead the paint stripping process. Process characteristics, leading mechanisms and a simple regression linear model, easily applicable to a wide range of paint stripping contexts, were also discussed in detail. (c) 2005 Elsevier B.V. All rights reserved.
2006
diode laser; diode laser source; paint stripping; process maps; removal depth
01 Pubblicazione su rivista::01a Articolo in rivista
Advance in paint stripping from aluminium substrates / M., Barletta; Gisario, Annamaria; V., Tagliaferri. - In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. - ISSN 0924-0136. - ELETTRONICO. - 173:2(2006), pp. 232-239. [10.1016/j.jmatprotec.2005.11.029]
File allegati a questo prodotto
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11573/139665
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 44
  • ???jsp.display-item.citation.isi??? 40
social impact